Free Apr-2025 201 Certification Sample Questions certification Exam [Q122-Q139]

Rate this post

Free Apr-2025 201 Certification Sample Questions certification Exam

Certification Topics of 201 Exam PDF Recently Updated Questions

The F5 201 exam covers a wide range of topics that are critical to the effective administration of F5 BIG-IP systems. These include but are not limited to the configuration of virtual servers, pools, and nodes, the implementation of load balancing and traffic management, the execution of basic troubleshooting, and the management of BIG-IP high availability features.

F5 201 (BIG-IP Administrator) Certification Exam is a comprehensive test that validates the skills and knowledge of IT professionals in managing and administering the F5 BIG-IP Application Delivery Controller (ADC) platform. 201 exam is intended for individuals who have experience in configuring, deploying, and managing F5 BIG-IP solutions in complex network environments. Passing the F5 201 exam is a prerequisite for obtaining the F5 Certified BIG-IP Administrator (F5-CA) certification.

NO.122 Monitors can be assigned to which three resources? (Choose three.)

NATs

pools

iRules

nodes

SNATs

pool members

virtual servers

NO.123 A BIG-IP Administrator needs to view the CPU utilization of a particular Virtual Server. Which section of the Configuration Utility should the administrator use for this purpose?

Statistics > Module Statistics > Local Traffic > Virtual Addresses

Statistics > Module Statistics > Traffic Summary

Statistics > Analytics > Process CPU Utilization

Statistics > Module Statistics > Local Traffic > Virtual Servers

NO.124 A BIG-IP Administrator makes a configuration change to a Virtual Server on the Standby device of an HA pair. The HA pair is currently configured with Auto-Sync Enabled. What effect will the change have on the HA pair configuration?

The change will be undone when Auto-Sync propagates the config to the HA pair.

The change will be propagated next time a configuration change is made on the Active device.

The change will be undone next time a configuration change is made on the Active device.

The change will take effect when Auto-Sync propagates the config to the HA pair.

NO.125 Assuming there are open connections through an active system’s virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.

All open connections are lost.

All open connections are maintained.

When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.

LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost.

All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.

NO.126 The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B.
The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B.
Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection.

10.10.20.1:80

10.10.20.2:8010.10.20.2:80

10.10.20.3:8010.10.20.3:80

10.10.20.4:8010.10.20.4:80

10.10.20.5:8010.10.20.5:80

It cannot be determined with the information given.

NO.127 Which two statements are true concerning the default communication between a redundant pair of BIG-IP systems? (Choose two.)

Synchronization occurs via a TCP connection using ports 683 and 684.

Connection mirroring data is shared via a TCP connection using port 1028.

Persistence mirroring data is shared via a TCP connection using port 1028.

Connection mirroring data is shared through the serial fail over cable unless network failover is enabled.

NO.128 Under what condition must an appliance license be reactivated.

Licenses only have to be reactivated for RMAs El no other situations.

Licenses generally have to be reactivated during system software upgrades.

Licenses only have to be
reactivated
when new features are added (IPv6, Routing Modules, etc)El no other situations.

Never. Licenses are permanent
for the
platform regardless
the version of software installed.

NO.129 The BIG-IP Administrator generates QKView using tmsh command “qkview -SO”. In which directory does the BIG-IP appliance save the QKView?

/etc/tmp

/var/tmp

/shared/qkview

/var /tmp/qkview

NO.130 A virtual server is listening at 10.10.1.100:80 and has the following iRule associated with it:
when HTTP_REQUEST { if { [HTTP::header UserAgent] contains “MSIE” }
{ pool MSIE_pool }
else { pool Mozilla_pool }
If a user connects to http://10.10.1.100/foo.html and their browser does not specify a UserAgent, which pool will receive the request?

MSIE_pool

Mozilla_pool

None. The request will be dropped.

Unknown. The pool cannot be determined from the information provided.

NO.131 A BIG-IP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIG-IP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member?

200.200.1.1

150.150.10.11

Floating self IP address on VLAN where the packet leaves the system

Floating self IP address on VLAN where the packet arrives on the system

NO.132 Which log file should the BIG-IP Administrator check to determine if a specific user tried to log in to the
8IG-IP Configuration by utility?

/var/log/pam/tally/log

/ver/log/secure

/var/log/trn

/var/log/http.d

NO.133 Which IP address will the client address be changed to when SNAT automap is specified within a Virtual Server configuration?

The floating self-IP address on the VLAN where the packet leaves the system.

The floating self-IP address on the VLAN where the packet arrives on the system.

It will alternate between the floating and non floating self-IP address on the VLAN where the packet leaves the system so that port exhaustion is avoided.

It will alternate between the floating and non floating self-IP address on the VLAN where the packet arrives on the system so that port exhaustion is avoided.

NO.134 Which two statements are true about SNATs? (Choose two.)

SNATs are enabled on all VLANs, by default.

SNATs can be configured within a Profile definition.

SNATs can be configured within a Virtual Server definition.

SNAT’s are enabled only on the VLAN where origin traffic arrives, by default.

NO.135 Refer to the exhibit.

An LTM device has a virtual server mapped to www.f5.com. Users report that when they connect to
/resources/201.1.2h.l_l.com they are unable to receive content.
What is the likely cause of the issue?

The pool associated with the virtual server does not have priority group activation enabled.

The virtual address does not have ARP enabled.

The virtual address does not have route advertising enabled.

The pool associated with the virtual server is falling its health check.

NO.136 Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the pool members?

No SSL certificates are required on the pool members.

The pool members.SSL certificates must only exist.

The pool members.SSL certificates must be issued from a certificate authority.

The pool members.SSL certificates must be created within the company hosting the BIGIPs.

NO.137 A site has six members in a pool. Three of the servers are new and have more memory and a faster processor than the others. Assuming all other factors are equal and traffic should be sent to all members, which two loadElbalancing methods are most appropriate. (Choose two.)

Ratio

Priority

Observed

Round Robin

NO.138 Interface 1.2 on a BIG-IP VE has a status of UNINITIALIZED. What is the reason for this status?

Interface 1.2 has been added to a trunk.

Interface 1.2 has NOT been assigned to a VLAN.

Interface 1.2 has been disabled.

No default route has been created.

trunk is a portchannel, you need to add a physical interface.

NO.139 Refer to the exhibit

The network team creates a new VLAN on the switches. The BIG-IP Administrator needs to create a configuration on the BIG-IP device. The BIG-IP Administrator creates a new VLAN and Self IP, but the servers on the new VLAN are NOT reachable from the BIG-IP device.
Which action should the BIG-IP Administrators to resolve this issue?