NSE5_FMG-6.4 PDF Dumps Nov 29, 2022 Recently Updated Questions [Q24-Q40]

Rate this post

NSE5_FMG-6.4 PDF Dumps | Nov 29, 2022 Recently Updated Questions

NSE5_FMG-6.4 Exam Questions – Valid NSE5_FMG-6.4 Dumps Pdf

Q24. In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?

Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device

Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.

Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.

FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.

FortiManager_6.4_Study_Guide-Online – page 346
FortiManager HA doesn’t support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device

Q25. An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a

By an Asterisk (*) at the end of the device name

Q26. When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.

FortiManager will revert and install a previous configuration revision on the managed FortiGate.

FortiGate will reject the CLI commands that will cause the tunnel to go down.

FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

Q27. An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

Q28. What does a policy package status of Conflict indicate?

The policy package reports inconsistencies and conflicts during a Policy Consistency Check.

The policy package does not have a FortiGate as the installation target.

The policy package configuration has been changed on both FortiManager and the managed device independently.

The policy configuration has never been imported after a device was registered on FortiManager.

Q29. Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

Q30. In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator sent a device registration to FortiManager from a remote FortiGate. Which one of the following statements is true?

The FortiGate will be added automatically to the default ADOM named FortiGate.

The FortiGate will be automatically added to the Training ADOM.

By default, the unregistered FortiGate will appear in the root ADOM.

The FortiManager administrator must add the unregistered device manually to the unregistered device

manually to the Training ADOM using the Add Device wizard

Q31. You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?

Any pending device settings will be installed automatically

Any unused objects from a previous ADOM are moved to the new ADOM automatically

The shared policy package will not be moved to the new ADOM

Policy packages will be imported into the new ADOM automaticallyD

Q32. Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

Q33. What are two outcomes of ADOM revisions? (Choose two.)

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current size of the whole ADOM

ADOM revisions can create System Checkpoints for the FortiManager configuration

ADOM revisions can save the current state of all policy packages and objects for an ADOM

Q34. View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

Fortimanager can discover FortiGate through a NATed FortiGate IP address. If a FortiManager NATed IP address is configured on FortiGate, then FortiGate can announce itself to FortiManager. FortiManager will not attempt to re-establish the FGFM tunnel to the FortiGate NATed IP address, if the FGFM tunnel is interrupted. Just like it was in the NATed FortiManager scenario, the FortiManager NATed IP address in this scenario is not configured under FortiGate central management configuration.

Q35. What is the purpose of the Policy Check feature on FortiManager?

To find and provide recommendation to combine multiple separate policy packages into one common policy package

To find and merge duplicate policies in the policy package

To find and provide recommendation for optimizing policies in a policy package

To find and delete disabled firewall policies in the policy package

Q36. Refer to the exhibits.
Exhibit one.

Exhibit two.

An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?

The DNS addresses in the default system settings are the same as the Training system template

The Training system template has other default settings

The ADOM is locked by another administrator

The Training system template does not have assigned devices

Q37. Refer to the exhibit.

Which two statements about an ADOM set in Normal mode on FortiManager are true? (Choose two.)

It supports the FortiManager script feature

It allows making configuration changes for managed devices on FortiManager panes

FortiManager automatically installs the configuration difference in revisions on the managed FortiGate

You cannot assign the same ADOM to multiple administrators

“FortiGate units in the ADOM will query their own configuration every 5 seconds. If there has been a configuration change, the FortiGate unit will send a diff revision on the change to the FortiManager using the FGFM protocol.”

Q38. View the following exhibit, which shows the Download Import Report:

Why it is failing to import firewall policy ID 2?

The address object used in policy ID 2 already exist in ADON database with any as interface association and conflicts with address object interface association locally on the FortiGate

Policy ID 2 is configured from interface any to port6 FortiManager rejects to import this policy because any interface does not exist on FortiManager

Policy ID 2 does not have ADOM Interface mapping configured on FortiManager

Policy ID 2 for this managed FortiGate already exists on FortiManager in policy package named Remote-FortiGate.

FortiManager_6.4_Study_Guide-Online – page 331 & 332

Q39. An administrator, Trainer, who is assigned the Super_User profile, is trying to approve a workflow session that was submitted by another administrator, Student. However, Trainer is unable to approve the workflow session.
What can prevent an admin account that has Super_User rights over the device from approving a workflow session?

Trainer is not a part of workflow approval group

Trainer does not have full rights over this ADOM

Trainer must close Student’s workflow session before approving the request

Student, who submitted the workflow session, must first self-approve the request

Q40. Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

When configuration revision is reverted to previous revision in the revision history

When FortiManager installs device-level changes to a managed device

When FortiManager is auto-updated with configuration changes made directly on a managed device

When changes to device-level database is made on FortiManager

Loading …

An introductory overview of the Fortinet NSE5_FMG-6.4 Certification Exam

Certifications are a great way to show your competence and knowledge of a particular subject. Certifications are more than just a piece of paper, they represent a real commitment to an organization, and they are a sign of your professionalism. NSE5_FMG-6.4 Exam is also called NSE 5 Network Security Analyst FortiManager. This certification exam is being offered and authorized by Fortinet. This certification is designed for candidates who are interested in network security and network security management. The candidates who are looking for job opportunities can easily grab the Fortinet NSE5_FMG-6.4 Certification Exam.

It provides the candidate with the knowledge and skills to manage, analyze, and report on Fortinet security devices and to protect an organization’s networks and data. NSE5_FMG-6.4 Dumps is a very helpful resource for the candidates to get ready for the Fortinet NSE5_FMG-6.4 Certification Exam. Firewall, IPS, and IDS are the most common Fortinet security devices. The style of the NSE5_FMG-6.4 Certification Exam is mostly based on the candidate’s ability to demonstrate hands-on skills.