Ultimate Guide to Prepare OMS-435 Certification Exam for Salesforce Developer in 2022 [Q42-Q62]

Rate this post

Ultimate Guide to Prepare OMS-435 Certification Exam for Salesforce Developer in 2022

Use Real OMS-435 Dumps – Salesforce Correct Answers updated on 2022

Salesforce OMS-435 Exam Syllabus Topics:

Topic	Details
Topic 1	Use a DataRaptor to Transform FlexCard Data JSONs Design and Build Parent and Child FlexCards
Topic 2	Test and Troubleshoot Components in the OmniStudio Interaction Console Configure FlexCard Flyouts to Display Additional Data
Topic 3	Build Integration Procedures and DataRaptors for OmniScripts and FlexCards Assign Data Sources to FlexCards, Including External Data Sources
Topic 4	Configure Element Properties such as Branching Conditions Learn the Benefits and Features of OmniStudio LWC and Component Types
Topic 5	Learn How OmniStudio uses Salesforce sObjects and Fields Design and Build Simple and Complex OmniScripts

NO.42 A developer needs to configure a DataRaptor to retrieve data from a single object. The structure of the output data does not need to be changed.
Following best practices, which type of DataRaptor should the developer use?

DataRaptor Transform

DataRaptor Extract

DataRaptor Load

DataRaptor Turbo Extract

NO.43 Which two in an integration Procedure or DataRaptor can execute a function like CONCAT or DATEDIFF?
Choose 2 answers

In a Set Values Action in a Value field.

In a DataRaptor in an Output Tab Output JSON Path.

In a DataRaptor Action in an Input Parameters value field.

In a Remote Action m an Additional Output value field.

NO.44 A developer examines data received from an external data source. The data is nested two levels down in the JSON structure.
Which OmniStudio tool could the developer use to simplify this data?

A guided workflow

A DataRaptor Transform

An HTTP Action Element

An integration Procedure

NO.45 On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label. What could cause this?

In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.

The field name in the FlexCard state does not match the DataRaptor Extract’s Output JSON Path name.

In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.

There are No test Data test Parameters configured.

NO.46 A developer creates a Flexcard that displays a contact’s mailing address and passes the contact’s postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact’s postal code?

{Postalcode}

{Parent.postalcode}

{Records.postalcode}

{Params.postalcode}

NO.47 A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard’s records In a Datable How should the developer configure the parent FlexCard’s Node?

{Records{0}}

{Records}

{Params, records}

{Recorded}

NO.48 A developer creates a Flexcard that displays a contact’s mailing address and passes the contact’s postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact’s postal code?

{Postalcode}

{Parent.postalcode}

{Records.postalcode}

{Params.postalcode}

NO.49 A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?

The first state with true conditions sequence closest to the top of the FlexCard canvas will display.

The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display

The state sequenced first in the FlexCard canvas will display.

The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.

NO.50 An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?

Use a Remote Action that calls the XMLStreamReader class

Use a Remote Action that calls the XMLStreamWriter class

Use a DataRaptor Transform to convert JSON to XML

Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.

NO.51 A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?

Toast Completion

Use Future

Invoke Mode Fire and Forget

Invoke Mode Non-Blocking

NO.52 A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?

The first state with true conditions sequence closest to the top of the FlexCard canvas will display.

The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display

The state sequenced first in the FlexCard canvas will display.

The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.

NO.53 A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

NO.54 When launching an OmniScript from an action on a FlexCard, the OmniScript displays, but no Salesforce data is populated:
Which two errors could cause this behavior?
Choose 2 answers
Choose 2 answers

The Id Field for Actions in the FlexCard is blank.

There is no active version of the Data Raptor Extract.

There is no active version of the OmniScript

In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.

NO.55 A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard’s records In a Datable How should the developer configure the parent FlexCard’s Node?

{Records{0}}

{Records}

{Params, records}

{Recorded}

NO.56 A developer writes an OmniScript that includes a DataRaptor that updates the Account statue based on information provided from the OmniScript. The information must be updated only if the Account record already exists. Otherwise, a new account must be created.
How should the developer accomplish this task?

Populate the Lookup object and Lookup fields

Check the Upset key and is required for Upsert checkboxes on the Account id field

Check the Upsert key checkbox on the Account Status field

Check Overwrite Target for all Null input checkbox on the Account id field

NO.57 A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

NO.58 A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?

Update the ContextId value to specify an id from the Production org.

Add a Show/Hide condition on the Set Values element.

Delete or Deactivate the Set Values element.

Deactivate the contextId key/value pair

NO.59 A developer has a requirement to create a child FlexCard that contain all of its parent FlexCard’s records in a Datatable.

{Records[0]}

{Records}

{Params records}

{recordId}

NO.60 An OmniScript displays data from an API using Integration Procedure, but some of the data is missing.
Which two configuration errors could cause this? Choose 2 answers

The element name for the missing data does not match the JSON node key in the Integration Procedure Response.

The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.

The JSOW sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure

The missing data is trimmed in the Integration Procedure Action Response JSON Path.

NO.61 A developer creates a DataRaptor Extract to retrieve data to pass to an external service. The external service expects the field value to be integer. However, the DataRaptor is sending it as a string.
Which action can the developer take to fix this?

In the DataRaptor Output tab, select the Output Data Type of that field to Integer.

In the DataRaptor Output tab, enter the default value as 0 on the field.

In the DataRaptor Extract tab, set the Input Data Type field to Integer.

In the DataRaptor Formula tab, define a formula using the function TOINTEGER and use the formula as output.

NO.62 A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?

As an OS Action

As a Custom Action

As an OmniStudio Action

As a Lightning Action