NSE5_FMG-7.0 PDF Dumps 2023 Exam Questions with Practice Test [Q26-Q48]

4.3/5 - (7 votes)

NSE5_FMG-7.0 PDF Dumps 2023 Exam Questions with Practice Test

Dumps for Free NSE5_FMG-7.0 Practice Exam Questions

QUESTION 26
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?

Set to workflow and use the ADOM locking feature

Set to read/write and use the policy locking feature

Set to normal and use the policy locking feature

Set to disable and use the policy locking feature

QUESTION 27
View the following exhibit.

Which statement is true regarding this failed installation log?

Policy ID 2 is installed without a source address

Policy ID 2 will not be installed

Policy ID 2 is installed in disabled state

Policy ID 2 is installed without a source device

QUESTION 28
Refer to the exhibit.

Given the configuration shown in the exhibit, which two statements are true? (Choose two.)

It allows two or more administrators to make configuration changes at the same time, in the same ADOM.

It disables concurrent read-write access to an ADOM.

It allows the same administrator to lock more than one ADOM at the same time.

It is used to validate administrator login attempts through external servers.

QUESTION 29
View the following exhibit.

Which of the following statements are true based on this configuration setting? (Choose two.)

This setting will enable the ADOMs feature on FortiManager.

This setting is applied globally to all ADOMs.

This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.

This setting will allow automatic updates to the policy package configuration for a managed device.

QUESTION 30
An administrator would like to authorize a newly-installed AP using AP Manager. What steps does the administrator need to perform to authorize an AP?

Authorize the new AP using AP Manager and wait until the change is updated on the FortiAP. Changes to the AP’s state do not require installation.

Changes to the AP’s state must be performed directly on the managed FortiGate.

Authorize the new AP using AP Manager and install the policy package changes on the managed FortiGate.

Authorize the new AP using AP Manager and install the device level settings on the managed FortiGate.

QUESTION 31
What does a policy package status of Conflict indicate?

The policy package reports inconsistencies and conflicts during a Policy Consistency Check.

The policy package does not have a FortiGate as the installation target.

The policy package configuration has been changed on both FortiManager and the managed device
independently.

The policy configuration has never been imported after a device was registered on FortiManager.

QUESTION 32
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

FortiManager will not allow the administrator to delete a referenced address object

FortiManager will disable the status of the referenced firewall policy

FortiManager will replace the deleted address object with the none address object in the referenced firewall policy

FortiManager will replace the deleted address object with all address object in the referenced firewall policy

QUESTION 33
Which two settings must be configured for SD-WAN Central Management? (Choose two.)

SD-WAN must be enabled on per-ADOM basis

You can create multiple SD-WAN interfaces per VDOM

When you configure an SD-WAN, you must specify at least two member interfaces.

The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

QUESTION 34
Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

192.168.0.1/24

10.200.1.0/24

It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.

Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

QUESTION 35
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)

When configuration revision is reverted to previous revision in the revision history

When FortiManager installs device-level changes to a managed device

When FortiManager is auto-updated with configuration changes made directly on a managed device

When changes to device-level database is made on FortiManager

QUESTION 36
View the following exhibit:

Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)

You must install these changes using Install Wizard

FortiGate will auto-update the FortiManager’s device-level database.

FortiManager will create a new revision history.

FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.

QUESTION 37
View the following exhibit.

An administrator is importing a new device to FortiManager and has selected the shown options. What will happen if the administrator makes the changes and installs the modified policy package on this managed FortiGate?

The unused objects that are not tied to the firewall policies will be installed on FortiGate

The unused objects that are not tied to the firewall policies will remain as read-only locally on FortiGate

The unused objects that are not tied to the firewall policies locally on FortiGate will be deleted

The unused objects that are not tied to the firewall policies in policy package will be deleted from the

QUESTION 38
Refer to the exhibit.

An administrator logs into the FortiManager GUI and sees the panes shown in the exhibit.
Which two reasons can explain why the FortiAnalyzer feature panes do not appear? (Choose two.)

The administrator logged in using the unsecure protocol HTTP, so the view is restricted.

The administrator profile does not have full access privileges like the Super_User profile.

The administrator IP address is not a part of the trusted hosts configured on FortiManager interfaces.

FortiAnalyzer features are not enabled on FortiManager.

QUESTION 39
View the following exhibit.

What is the purpose of setting ADOM Mode to Advanced?

The setting allows automatic updates to the policy package configuration for a managed device

The setting enables the ADOMs feature on FortiManager

This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.

The setting disables concurrent ADOM access and adds ADOM locking

QUESTION 40
An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)

Specify a gateway address when you create a default SD-WAN static route

Enable SD-WAN central management in the Training ADOM

Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings

Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces

QUESTION 41
View the following exhibit.

When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)

Once initiated, the install process cannot be canceled and changes will be installed on the managed device

Will not create new revision in the revision history

Installs device-level changes to FortiGate without launching the Install Wizard

Provides the option to preview configuration changes prior to installing them

QUESTION 42
An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

QUESTION 43
What are two outcomes of ADOM revisions? (Choose two.)

ADOM revisions can significantly increase the size of the configuration backups.

ADOM revisions can save the current size of the whole ADOM

ADOM revisions can create System Checkpoints for the FortiManager configuration

ADOM revisions can save the current state of all policy packages and objects for an ADOM

QUESTION 44
Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

The latest revision history for the managed FortiGate does match with the FortiGate running configuration

Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed

The latest history for the managed FortiGate does not match with the device-level database

Configuration changes directly made on the FortiGate have been automatically updated to device-level

QUESTION 45
Refer to the exhibit.

Which statement about the object named ALL is true?

FortiManager updated the object ALL using the FortiGate value in its database.

FortiManager installed the object ALL with the updated value.

FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.

FortiManager updated the object ALL using the FortiManager value in its database.

QUESTION 46
An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy
package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to
ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

QUESTION 47
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)

The Security Fabric license, group name and password are required for the FortiManager Security Fabric
integration

The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices

The Security Fabric settings are part of the device level settings

The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices

QUESTION 48
Refer to the exhibit.

According to the error message why is FortiManager failing to add the FortiAnalyzer device?

The administrator must turn off the Use Legacy Device login and add the FortiAnaJyzer device to the same network as Forti-Manager

The administrator must select the Forti-Manager administrative access checkbox on the FortiAnalyzer management interface

The administrator must use the Add Model Device section and discover the FortiAnaJyzer device

The administrator must use the correct user name and password of the FortiAnalyzer device

Fortinet NSE5_FMG-7.0 (Fortinet NSE 5 – FortiManager 7.0) Certification Exam is an advanced certification exam designed to assess the knowledge and skills of network security professionals who use FortiManager to manage Fortinet security infrastructures. NSE5_FMG-7.0 exam is designed to test the candidate’s ability to configure, manage, and troubleshoot FortiManager, FortiAnalyzer, and FortiGate devices. NSE5_FMG-7.0 exam is intended for professionals who work in a Fortinet network security environment and are responsible for managing and maintaining Fortinet security infrastructures.

Fortinet NSE5_FMG-7.0 certification exam is designed to test the skills and knowledge of IT professionals who are responsible for managing and configuring Fortinet security solutions. NSE5_FMG-7.0 exam focuses on FortiManager 7.0, which is a centralized security management platform that allows administrators to manage and configure multiple Fortinet devices from a single console.

Check your preparation for Fortinet NSE5_FMG-7.0 On-Demand Exam: https://www.test4cram.com/NSE5_FMG-7.0_real-exam-dumps.html

Leave a Reply Cancel reply