[Q44-Q61] 2022 Updates For the Latest C-IBP-2111 Free Exam Study Guide!

Rate this post

2022 Updates For the Latest C-IBP-2111 Free Exam Study Guide!

Best C-IBP-2111 Exam Preparation Material with New Dumps Questions

SAP C-IBP-2111 Exam Syllabus Topics:

Topic	Details
Topic 1	Describe the benefits of implementing SAP’s Integrated Business Planning solution Demand Planning. Solution Architecture. S&OP Review
Topic 2	Create and use key figures and attributes Key Figures & Attributes
Topic 3	Configure supply planning, run various solvers to generate planning results Supply and Response
Topic 4	Define and view information with user-defined charts and dashboards Analytics and Reporting
Topic 5	Create statistical forecast using historical data with basic methods Use the Fiori Launchpad to customize the UI, work with Excel UI

Q44. Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.

It checks whether the sourcing in the Production Source Item Master Data type exists.

It checks whether the location resource specified in the master data forms a cycle in the supply chain network.

It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.

It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.

It checks whether the required planning level master data exists for a subset of input key figures.

Q45. How can you check if key figure is editable or non-editable?

Using the Web-based Planning app when selecting key figures

Using the Key Figure Calculations app

Using the Edit View and then the Edit Planning View option

Using the Analytics Advanced app when selecting key figures

Q46. You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.

Disaggregation according to an equal split

Disaggregation in batch triggered by an application job

An internal system-generated disaggregation

Proportional disaggregation by using KF2 in the expression

Disaggregation according to a user-defined expression

Q47. What are the ways to achieve rolling aggregation with SAP IBP?

Using attribute as a key figure

Using key figure calculation

Using local member

Using aggregation mode average

Q48. NO.21 For which of the following application jobs can you enter planning filters as parameters? Note: There are 2 correct Answers to this question.

Purge Non-Conforming Data

Create Time Periods for Time Profiles

Purge Key Figure Data

Purge Master Data

Q49. While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note:
There are 2 correct Answers to this question.

Capacity leveling will be possible for production and storage resources.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Enough demands can be pulled forward and pull production will occur.

Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.

Q50. Which of the following can be used as inputs for inventory level optimization? Note: There are 2 correct Answers to this question.

Target inventory level

Lead time variability

Lot sizes

Reorder point

Q51. Which property of an attribute will allow it to be used as an attribute as a key figure?

Type TIMESTAMP

Type NAVCHAR

Type INTEGER

Type DECIMAL

Q52. A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF(“PERIODID2” =”$$PERIODID2CU$$…)

IF(“PERIODID5” =”$$PERIODID5CU$$…)

IF(“PERIODID4” = “SSPERIODID4CU$$…)

IF(“PERIODID3” =”$$PERIODID3CUSS…)

Q53. Which features apply to quota violations modeled with the optimizer?

Quotas require sourcing ratios to be maintained.

Min and Max Quotas have to be the same as sourcing ratios.

Quota violation cost is maintained as an attribute as a key figure.

Quotas can be modeled for sourcing location, production, and consensus demand.

Q54. You want to set up demand sensing to analyze demand changes in execution or close to execution windows.
Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.

At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.

The result generates sensed demand data at the monthly time granularity for the full time horizon

Set up the forecast model to be executed at product-location level.

It is mandatory to load historical lag-based snapshot data.

Q55. What are some of the prerequisites for configuring a planning area that results in a successful consistency check? Note: There are 2 correct Answers to this question.

Configure at most two input key figures on the same planning level in a key figure calculation.

Assign the compound master data type and its component master data types.

Specify a planning horizon in the planning area for each level of the assigned time profile.

Configure at least one calculated key figure for the planning area.

Q56. What options for copying will be available to you? Note: There are 2 correct Answers to this question.

Creation of a partial copy with a new ID along with the time profile and required master data types

Creation of a partial copy with a new ID along with the time profile and all master data objects

Creation of an exact copy with a new ID, with the time profile and master data types shared with the source

Creation of an exact copy with a new ID along with the time profile and master data types

Q57. While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.

Capacity leveling will be possible for production and storage resources.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Enough demands can be pulled forward and pull production will occur.

Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.

Q58. You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?

Incremental production values

Capacity expansion with additional costs

Production source validity at the start of seasonal peak

Adjusted production interactive values

Q59. You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to?
Note: There are 2 correct Answers to this question.

Planning view templates in the SAP IBP add-in for Microsoft Excel

Supply chain graph in Supply Chain Network app

Snapshot operator in the SAP IBP add-in for Microsoft Excel

Jobs in the Applications Jobs app

Q60. You are creating advanced copy operators as part of an SAP IBP solution that is being implemented.
What do you need to be aware of when defining data transfer? Note: There are 2 correct Answers to this question.

Specifying target key figure is mandatory.

Specifying target key figure that is time independent is possible.

Specifying source key figure is mandatory.

Selecting by attribute with option ‘contain’ is possible.

Q61. A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF(“PERIODID2” =”$$PERIODID2CU$$…)

IF(“PERIODID5” =”$$PERIODID5CU$$…)

IF(“PERIODID4” =”$$PERIODID4CU$$…)

IF(“PERIODID3” =”$$PERIODID3CU$$…)

Loading …