Pass SY0-701 Brain Dump Updated Certification Sample Questions [Q86-Q108]

After completing a vulnerability assessment and remediating the identified vulnerabilities, the next step is to rescan the network to verify that the vulnerabilities have been successfully fixed and no new vulnerabilities have been introduced. A vulnerability assessment is a process of identifying and evaluating the weaknesses andexposures in a network, system, or application that could be exploited by attackers. A vulnerability assessment typically involves using automated tools, such as scanners, to scan the network and generate a report of the findings. The report may include information such as the severity, impact, and remediation of the vulnerabilities. The operations team is responsible for applying the appropriate patches, updates, or configurations to address the vulnerabilities and reduce the risk to the network. A rescan is necessary to confirm that the remediation actions have been effective and that the network is secure.
Conducting an audit, initiating a penetration test, or submitting a report are not the next steps after completing a vulnerability assessment and remediating the vulnerabilities. An audit is a process of reviewing and verifying the compliance of the network with the established policies, standards, and regulations. An audit may be performed by internal or external auditors, and it may use the results of the vulnerability assessment as part of the evidence. However, an audit is not a mandatory step after a vulnerability assessment, and it does not validate the effectiveness of the remediation actions.
A penetration test is a process of simulating a real-world attack on the network to test the security defenses and identify any gaps or weaknesses. A penetration test may use the results of the vulnerability assessment as a starting point, but it goes beyond scanning and involves exploiting the vulnerabilities to gain access or cause damage. A penetration test may be performed after a vulnerability assessment, but only with the proper authorization, scope, and rules of engagement. A penetration test is not a substitute for a rescan, as it does not verify that the vulnerabilities have been fixed.
Submitting a report is a step that is done after the vulnerability assessment, but before the remediation. The report is a document that summarizes the findings and recommendations of the vulnerability assessment, and it is used to communicate the results to the stakeholders and the operations team. The report may also include a follow-up plan and a timeline for the remediation actions. However, submitting a report is not the final step after the remediation, as it does not confirm that the network is secure.
References = CompTIA Security+ SY0-701 Certification Study Guide, page 372-375; Professor Messer’s CompTIA SY0-701 Security+ Training Course, video 4.1 – Vulnerability Scanning, 0:00 – 8:00.

Explanation
A user provisioning script is an automation technique that uses a predefined set of instructions or commands to create, modify, or delete user accounts and assign appropriate access or permissions. A user provisioning script can help to streamline account creation by reducing manual errors, ensuring consistency and compliance, and saving time and resources12.
The other options are not automation techniques that can streamline account creation:
Guard rail script: This is a script that monitors and enforces the security policies and rules on a system or a network. A guard rail script can help to prevent unauthorized or malicious actions, such as changing security settings, accessing restricted resources, or installing unwanted software3.
Ticketing workflow: This is a process that tracks and manages the requests, issues, or incidents that are reported by users or customers. A ticketing workflow can help to improve the communication, collaboration, and resolution of problems, but it does not automate the account creation process4.
Escalation script: This is a script that triggers an alert or a notification when a certain condition or threshold is met or exceeded. An escalation script can help to inform the relevant parties or authorities of a critical situation, such as a security breach, a performance degradation, or a service outage.
References = 1: CompTIA Security+ SY0-701 Certification Study Guide, page 1022: User Provisioning – CompTIA Security+ SY0-701 – 5.1, video by Professor Messer3: CompTIA Security+ SY0-701 Certification Study Guide, page 1034: CompTIA Security+ SY0-701 Certification Study Guide, page 104. : CompTIA Security+ SY0-701 Certification Study Guide, page 105.

Explanation
A false positive is a result that indicates a vulnerability or a problem when there is none. In this case, the vulnerability scanning report shows that the telnet service on port 23 is open and uses an insecure network protocol. However, the security analyst performs a test using nmap and a script that checks for telnet encryption support. The result shows that the telnet server supports encryption, which means that the data transmitted between the client and the server can be protected from eavesdropping. Therefore, the reported vulnerability is a false positive and does not reflect the actual security posture of the server. The security analyst should verify the encryption settings of the telnet server and client and ensure that they are configured properly3. References: 3: Telnet Protocol – Can You Encrypt Telnet?

Explanation
RBAC stands for Role-Based Access Control, which is a method of restricting access to data and resources based on the roles or responsibilities of users. RBAC simplifies the management of permissions by assigning roles to users and granting access rights to roles, rather than to individual users. RBAC can help enforce the principle of least privilege and reduce the risk of unauthorized access or data leakage. The other options are not as suitable for the scenario as RBAC, as they either do not prevent access based on responsibilities, or do not apply a simplified format. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, page 133 1

ARO (Annualized Rate of Occurrence) is an analysis element that measures the frequency or likelihood of an event happening in a given year. ARO is often used in risk assessment and management, as it helps to estimate the potential loss or impact of an event. A company can use ARO to calculate the annualized loss expectancy (ALE) of an event, which is the product of ARO and the single loss expectancy (SLE). ALE represents the expected cost of an event per year, and can be used to compare with the cost of implementing a security control or purchasing an insurance policy.
The company most likely used ARO in making the decision to remove the coverage for ransomware attacks from its cyber insurance policy. The company may have estimated the ARO of ransomware attacks based on historical data, industry trends, or threat intelligence, and found that the ARO was low or negligible. The company may have also calculated the ALE of ransomware attacks, and found that theALE was lower than the cost of the insurance policy. Therefore, the company decided to reduce the cost of its annual cyber insurance policy by removing the coverage for ransomware attacks, as it deemed the risk to be acceptable or manageable.
IMTTR (Incident Management Team Training and Readiness), RTO (Recovery Time Objective), and MTBF (Mean Time Between Failures) are not analysis elements that the company most likely used in making the decision to remove the coverage for ransomware attacks from its cyber insurance policy. IMTTR is a process of preparing and training the incident management team to respond effectively to security incidents. IMTTR does not measure the frequency or impact of an event, but rather the capability and readiness of the team. RTO is a metric that defines the maximum acceptable time for restoring a system or service after a disruption. RTO does not measure the frequency or impact of an event, but rather the availability and continuity of the system or service. MTBF is a metric that measures the average time between failures of a system or component.
MTBF does not measure the frequency or impact of an event, but rather the reliability and performance of the system or component.
References = CompTIA Security+ SY0-701 Certification Study Guide, page 97-98; Professor Messer’s CompTIA SY0-701 Security+ Training Course, video 5.2 – Risk Management, 0:00 – 3:00.

Explanation
Automation is the best way to consistently determine on a daily basis whether security settings on servers have been modified. Automation is the process of using software, hardware, or other tools to perform tasks that would otherwise require human intervention or manual effort. Automation can help to improve the efficiency, accuracy, and consistency of security operations, as well as reduce human errors and costs.
Automation can be used to monitor, audit, and enforce security settings on servers, such as firewall rules, encryption keys, access controls, patch levels, and configuration files. Automation can also alert security personnel of any changes or anomalies that may indicate a security breach or compromise12.
The other options are not the best ways to consistently determine on a daily basis whether security settings on servers have been modified:
Compliance checklist: This is a document that lists the security requirements, standards, or best practices that an organization must follow or adhere to. A compliance checklist can help to ensure that the security settings on servers are aligned with the organizational policies and regulations, but it does not automatically detect or report any changes or modifications that may occur on a daily basis3.
Attestation: This is a process of verifying or confirming the validity or accuracy of a statement, claim, or fact. Attestation can be used to provide assurance or evidence that the security settings on servers are correct and authorized, but it does not continuously monitor or audit any changes or modifications that may occur on a daily basis4.
Manual audit: This is a process of examining or reviewing the security settings on servers by human inspectors or auditors. A manual audit can help to identify and correct any security issues or discrepancies on servers, but it is time-consuming, labor-intensive, and prone to human errors. A manual audit may not be feasible or practical to perform on a daily basis.
References = 1: CompTIA Security+ SY0-701 Certification Study Guide, page 1022: Automation and Scripting – CompTIA Security+ SY0-701 – 5.1, video by Professor Messer3: CompTIA Security+ SY0-701 Certification Study Guide, page 974: CompTIA Security+ SY0-701 Certification Study Guide, page 98. :
CompTIA Security+ SY0-701 Certification Study Guide, page 99.

Scheduled downtime is a planned period of time when a system or service is unavailable for maintenance, updates, upgrades, or other changes. Scheduled downtime gives administrators a set period to perform changes to an operational system without disrupting the normal business operations or affecting the availability of the system or service. Scheduled downtime also allows administrators to inform the users and stakeholders about the expected duration and impact of the changes. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, Chapter 12: Security Operations and Administration, page 579 1

Explanation
A detective control is a type of control that monitors and analyzes the events and activities in a system or a network, and alerts or reports when an incident or a violation occurs. A SIEM (Security Information and Event Management) system is a tool that collects, correlates, and analyzes the logs from various sources, such as firewalls, routers, servers, or applications, and provides a centralized view of the security status and incidents.
An analyst who reviews the logs on a weekly basis can identify and investigate any anomalies, trends, or patterns that indicate a potential threat or a breach. A detective control can help the company to respond quickly and effectively to the incidents, and to improve its security posture and resilience. References = CompTIA Security+ Study Guide with over 500 Practice Test Questions: Exam SY0-701, 9th Edition, Chapter 1, page 23. CompTIA Security+ SY0-701 Exam Objectives, Domain 4.3, page
14.

Explanation
Phishing is a type of social engineering attack that involves sending fraudulent emails that appear to be from legitimate sources, such as payment websites, banks, or other trusted entities. The goal of phishing is to trick the recipients into clicking on malicious links, opening malicious attachments, or providing sensitive information, such as log-in credentials, personal data, or financial details. In this scenario, the employee received an email from a payment website that asked the employee to update contact information. The email contained a link that directed the employee to a fake website that mimicked the appearance of the real one.
The employee entered the log-in information, but received a “page not found” error message. This indicates that the employee fell victim to a phishing attack, and the attacker may have captured the employee’s credentials for the payment website. References = Other Social Engineering Attacks – CompTIA Security+ SY0-701 – 2.2, CompTIA Security+: Social Engineering Techniques & Other Attack … – NICCS, [CompTIA Security+ Study Guide with over 500 Practice Test Questions: Exam SY0-701, 9th Edition]

Explanation
An acceptable use policy (AUP) is a set of rules that govern how users can access and use a corporate network or the internet. The AUP helps companies minimize their exposure to cyber security threats and limit other risks. The AUP also serves as a notice to users about what they are not allowed to do and protects the company against misuse of their network. Users usually have to acknowledge that they understand and agree to the rules before accessing the network1.
An AUP best represents a preventive security control type, because it aims to deter or stop potential security incidents from occurring in the first place. A preventive control is proactive and anticipates possible threats and vulnerabilities, and implements measures to prevent them from exploiting or harming the system or the data. A preventive control can be physical, technical, or administrative in nature2.
Some examples of preventive controls are:
* Locks, fences, or guards that prevent unauthorized physical access to a facility or a device
* Firewalls, antivirus software, or encryption that prevent unauthorized logical access to a network or a system
* Policies, procedures, or training that prevent unauthorized or inappropriate actions or behaviors by users or employees An AUP is an example of an administrative preventive control, because it defines the policies and procedures that users must follow to ensure the security and proper use of the network and the IT resources. An AUP can prevent users from engaging in activities that could compromise the security, performance, or availability of the network or the system, such as:
* Downloading or installing unauthorized or malicious software
* Accessing or sharing sensitive or confidential information without authorization or encryption
* Using the network or the system for personal, illegal, or unethical purposes
* Bypassing or disabling security controls or mechanisms
* Connecting unsecured or unapproved devices to the network
By enforcing an AUP, a company can prevent or reduce the likelihood of security breaches, data loss, legal liability, or reputational damage caused by user actions or inactions3.
References = 1: How to Create an Acceptable Use Policy – CoreTech, 2: [Security Control Types: Preventive, Detective, Corrective, and Compensating], 3: Why You Need A Corporate Acceptable Use Policy – CompTIA

Explanation
An intrusion prevention system (IPS) is a security device that monitors network traffic and blocks or modifies malicious packets based on predefined rules or signatures. An IPS can prevent attacks that exploit known vulnerabilities in older browser versions by detecting and dropping the malicious packets before they reach the target system. An IPS can also perform other functions, such as rate limiting, encryption, or redirection. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, Chapter 3: Securing Networks, page 132.

The company should request a certification from the vendor that confirms the storage array has been disposed of securely and in compliance with the company’s policies and standards. A certification provides evidence that the vendor has followed the proper procedures and methods to destroy the classified data and prevent unauthorized access or recovery. A certification may also include details such as the date, time, location, and method of disposal, as well as the names and signatures of the personnel involved. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, Chapter 3, page 1441

Explanation
Scheduled downtime is a planned period of time when a system or service is unavailable for maintenance, updates, upgrades, or other changes. Scheduled downtime gives administrators a set period to perform changes to an operational system without disrupting the normal business operations or affecting the availability of the system or service. Scheduled downtime also allows administrators to inform the users and stakeholders about the expected duration and impact of the changes. References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, Chapter 12: Security Operations and Administration, page 579 1

Explanation
Root cause analysis is a process of identifying and resolving the underlying factors that led to an incident. By conducting root cause analysis as part of incident response, security professionals can learn from the incident and implement corrective actions to prevent future incidents of the same nature. For example, if the root cause of a data breach was a weak password policy, the security team can enforce a stronger password policy and educate users on the importance of password security. Root cause analysis can also help to improve security processes, policies, and procedures, and to enhance security awareness and culture within the organization.
Root cause analysis is not meant to gather loCs (indicators of compromise) for the investigation, as this is a task performed during the identification and analysis phases of incident response. Root cause analysis is also not meant to discover which systems have been affected or to eradicate any trace of malware on the network, as these are tasks performed during the containment and eradication phases of incident response. References = CompTIA Security+ SY0-701 Certification Study Guide, page 424-425; Professor Messer’s CompTIA SY0-701 Security+ Training Course, video 5.1 – Incident Response, 9:55 – 11:18.

Explanation
PCI DSS is the Payment Card Industry Data Security Standard, which is a set of security requirements for organizations that store, process, or transmit cardholder data. PCI DSS aims to protect the confidentiality, integrity, and availability of cardholder data and prevent fraud, identity theft, and data breaches. PCI DSS is enforced by the payment card brands, such as Visa, Mastercard, American Express, Discover, and JCB, and applies to all entities involved in the payment card ecosystem, such as merchants, acquirers, issuers, processors, service providers, and payment applications.
If a large bank fails an internal PCI DSS compliance assessment, the most likely outcome is that the bank will face fines from the payment card brands. An internal PCI DSS compliance assessment is a self-assessment that the bank performs to evaluate its own compliance with the PCI DSS requirements. The bank must submit the results of the internal assessment to the payment card brands or their designated agents, such as acquirers or qualified security assessors (QSAs). If the internal assessment reveals that the bank is not compliant with the PCI DSS requirements, the payment card brands may impose fines on the bank as a penalty for violating the PCI DSS contract. The amount and frequency of the fines may vary depending on the severity and duration of the non-compliance, the number and type of cardholder data compromised, and the level of cooperation and remediation from the bank. The fines can range from thousands to millions of dollars per month, and can increase over time if the non-compliance is not resolved.
The other options are not correct because they are not the most likely outcomes if a large bank fails an internal PCI DSS compliance assessment. B. Audit findings. Audit findings are the results of an external PCI DSS compliance assessment that is performed by a QSA or an approved scanning vendor (ASV). An external assessment is required for certain entities that handle a large volume of cardholder data or have a history of non-compliance. An external assessment may also be triggered by a security incident or a request from the payment card brands. Audit findings may reveal the gaps and weaknesses in the bank’s security controls and recommend corrective actions to achieve compliance. However, audit findings are not the outcome of an internal assessment, which is performed by the bank itself. C. Sanctions. Sanctions are the measures that the payment card brands may take against the bank if the bank fails to pay the fines or comply with the PCI DSS requirements. Sanctions may include increasing the fines, suspending or terminating the bank’s ability to accept or process payment cards, or revoking the bank’s PCI DSS certification. Sanctions are not the immediate outcome of an internal assessment, but rather the possible consequence of prolonged or repeated non-compliance. D. Reputation damage. Reputation damage is the loss of trust and credibility that the bank may suffer from its customers, partners, regulators, and the public if the bank fails an internal PCI DSS compliance assessment. Reputation damage may affect the bank’s brand image, customer loyalty, market share, and profitability. Reputation damage is not a direct outcome of an internal assessment, but rather a potential risk that the bank may face if the non-compliance is exposed or exploited by malicious actors. References = CompTIA Security+ Study Guide (SY0-701), Chapter 8: Governance, Risk, and Compliance, page 388. Professor Messer’s CompTIA SY0-701 Security+ Training Course, Section 8.2:
Compliance and Controls, video: PCI DSS (5:12). PCI Security Standards Council, PCI DSS Quick Reference Guide, page 4. PCI Security Standards Council, PCI DSS FAQs, question 8. PCI Security Standards Council, PCI DSS FAQs, question 9. [PCI Security Standards Council], PCI DSS FAQs, question 10. [PCI Security Standards Council], PCI DSS FAQs, question 11. [PCI Security Standards Council], PCI DSS FAQs, question
12. [PCI Security Standards Council], PCI DSS FAQs, question 13. [PCI Security Standards Council], PCI DSS FAQs, question 14. [PCI Security Standards Council], PCI DSS FAQs, question 15. [PCI Security Standards Council], PCI DSS FAQs, question 16. [PCI Security Standards Council], PCI DSS FAQs, question
17. [PCI Security Standards Council], PCI DSS FAQs, question 18. [PCI Security Standards Council], PCI DSS FAQs, question 19. [PCI Security Standards Council], PCI DSS FAQs, question 20. [PCI Security Standards Council], PCI DSS FAQs, question 21. [PCI Security Standards Council], PCI DSS FAQs, question
22. [PCI Security Standards Council], PCI DSS FAQs, question 23. [PCI Security Standards Council], PCI DSS FAQs, question 24. [PCI Security Standards Council], PCI DSS FAQs, question 25. [PCI Security Standards Council], PCI DSS FAQs, question 26. [PCI Security Standards Council], PCI DSS FAQs, question
27. [PCI Security Standards Council], PCI DSS FAQs, question 28. [PCI Security Standards Council], PCI DSS FAQs, question 29. [PCI Security Standards Council], PCI DSS FAQs, question 30. [PCI Security Standards Council]

The correct answer is D because it allows only the device with the IP address 10.50.10.25 to send outbound DNS requests on port 53, and denies all other devices from doing so. The other options are incorrect because they either allow all devices to send outbound DNS requests (A and C), or they allow no devices to send outbound DNS requests (B). References = You can learn more about firewall ACLs and DNS in the following resources:
CompTIA Security+ SY0-701 Certification Study Guide, Chapter 4: Network Security1 Professor Messer’s CompTIA SY0-701 Security+ Training Course, Section 3.2: Firewall Rules2 TOTAL: CompTIA Security+ Cert (SY0-701) | Udemy, Section 6: Network Security, Lecture 28:
Firewall Rules3

Explanation
Side loading is the process of installing software outside of a manufacturer’s approved software repository.
This can expose the device to potential vulnerabilities, such as malware, spyware, or unauthorized access. Side loading can also bypass security controls and policies that are enforced by the manufacturer or the organization. Side loading is often done by users who want to access applications or features that are not available or allowed on their devices. References = Sideloading – CompTIA Security + Video Training | Interface Technical Training, Security+ (Plus) Certification | CompTIA IT Certifications, Load Balancers – CompTIA Security+ SY0-501 – 2.1, CompTIA Security+ SY0-601 Certification Study Guide.

Intellectual property is a type of data that consists of ideas, inventions, designs, or other creative works that have commercial value and are protected by law. Employees in the research and development business unit are most likely to use intellectual property data in their day-to-day work activities, as they are involved in creating new products or services for the company. Intellectual property data needs to be protected from unauthorized use, disclosure, or theft, as it can give the company a competitive advantage in the market. Therefore, these employees receive extensive training to ensure they understand how to best protect this type of data. References = CompTIA Security+ SY0-701 Certification Study Guide, page 90; Professor Messer’s CompTIA SY0-701 Security+ Training Course, video 1.2 – Security Concepts, 7:57 – 9:03.

A service level agreement (SLA) is a type of agreement that defines the expectations and responsibilities between a service provider and a customer. It usually includes the quality, availability, and performance metrics of the service, as well as the time frame in which the provider needs to respond to service requests, incidents, or complaints. An SLA can help ensure that the customer receives the desired level of service and that the provider is accountable for meeting the agreed-upon standards.
References:
Security+ (Plus) Certification | CompTIA IT Certifications, under “About the exam”, bullet point 3:
“Operate with an awareness of applicable regulations and policies, including principles of governance, risk, and compliance.” CompTIA Security+ Certification Kit: Exam SY0-701, 7th Edition, Chapter 1, page 14: “Service Level Agreements (SLAs) are contracts between a service provider and a customer that specify the level of service expected from the service provider.”

Explanation
Whaling is a type of phishing attack that targets high-profile individuals, such as executives, celebrities, or politicians. The attacker impersonates someone with authority or influence and tries to trick the victim into performing an action, such as transferring money, revealing sensitive information, or clicking on a malicious link. Whaling is also called CEO fraud or business email compromise2.
References: CompTIA Security+ Study Guide: Exam SY0-701, 9th Edition, Chapter 3, page 97.

Explanation
A buffer overflow is a type of software vulnerability that occurs when an application writes more data to a memory buffer than it can hold, causing the excess data to overwrite adjacent memory locations. This can lead to unexpected behavior, such as crashes, errors, or code execution. A buffer overflow can be exploited by an attacker to inject malicious code or commands into the application, which can compromise the security and functionality of the system. An organization’s internet-facing website was compromised when an attacker exploited a buffer overflow. To best protect against similar attacks in the future, the organization should deploy a web application firewall (WAF). A WAF is a type of firewall that monitors and filters the traffic between a web application and the internet. A WAF can detect and block common web attacks, such as buffer overflows, SQL injections, cross-site scripting (XSS), and more. A WAF can also enforce security policies and rules, such as input validation, output encoding, and encryption. A WAF can provide a layer of protection for the web application, preventing attackers from exploiting its vulnerabilities and compromising its data. References = Buffer Overflows – CompTIA Security+ SY0-701 – 2.3, Web Application Firewalls – CompTIA Security+ SY0-701 – 2.4, [CompTIA Security+ Study Guide with over 500 Practice Test Questions: Exam SY0-701, 9th Edition]

Explanation
A disaster recovery plan (DRP) is a set of policies and procedures that aim to restore the normal operations of an organization in the event of a system failure, natural disaster, or other emergency. A DRP typically includes the following elements:
A risk assessment that identifies the potential threats and impacts to the organization’s critical assets and processes.
A business impact analysis that prioritizes the recovery of the most essential functions and data.
A recovery strategy that defines the roles and responsibilities of the recovery team, the resources and tools needed, and the steps to follow to restore the system.
A testing and maintenance plan that ensures the DRP is updated and validated regularly. A DRP is required for an organization to properly manage its restore process in the event of system failure, as it provides a clear and structured framework for recovering from a disaster and minimizing the downtime and data loss. References = CompTIA Security+ Study Guide (SY0-701), Chapter 7: Resilience and Recovery, page 325.

Firmware is a type of software that is embedded in hardware devices, such as BIOS, routers, printers, or cameras. Firmware controls the basic functions and operations of the device, and can be updated or patched to fix bugs, improve performance, or enhance security. Firmware vulnerabilities are flaws or weaknesses in the firmware code that can be exploited by attackers to gain unauthorized access, modify settings, or cause damage to the device or the network. A BIOS update is a patch that addresses a firmware vulnerability in the basic input/output system of a computer, which is responsible for booting the operating system and managing the communication between the hardware and the software. The other options are not types of vulnerabilities, but rather categories of software or technology.