Download Latest 300-715 Dumps with Authentic Real Exam QA’s [Q35-Q55]

Rate this post

Download Latest 300-715 Dumps with Authentic Real Exam Questions

Authentic 300-715 Exam Dumps PDF – Mar-2024 Updated

NEW QUESTION 35
An engineer is configuring web authentication and needs to allow specific protocols to permit DNS traffic.
Which type of access list should be used for this configuration?

reflexive ACL

extended ACL

standard ACL

numbered ACL

NEW QUESTION 36
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?

Enable the privilege levels in Cisco ISE

Enable the privilege levels in the IOS devices.

Define the command privileges for levels 2-5 in the IOS devices

Define the command privileges for levels 2-5 in Cisco ISE

NEW QUESTION 37
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?

TCP 8909

TCP 8905

UDP 1812

TCP 443

NEW QUESTION 38
By default, which traffic does an 802.IX-enabled switch allow before authentication?

all traffic

no traffic

traffic permitted in the port dACL on Cisco ISE

traffic permitted in the default ACL on the switch

NEW QUESTION 39
A Cisco ISE administrator must restrict specific endpoints from accessing the network while in closed mode. The requirement is to have Cisco ISE centrally store the endpoints to restrict access from. What must be done to accomplish this task”

Add each MAC address manually to a blocklist identity group and create a policy denying access

Create a logical profile for each device’s profile policy and block that via authorization policies.

Create a profiling policy for each endpoint with the cdpCacheDeviceld attribute.

Add each IP address to a policy denying access.

NEW QUESTION 40
Refer to the exhibit.
An engineer is configuring Cisco ISE for guest services They would like to have any unregistered guests redirected to the guest portal for authentication then have a CoA provide them with full access to the network that is segmented via firewalls Why is the given configuration failing to accomplish this goal?

The Guest Flow condition is not in the line that gives access to the quest portal

The Network_Access_Authentication_Passed condition will not work with guest services for portal access.

The Permit Access result is not set to restricted access in its policy line

The Guest Portal and Guest Access policy lines are in the wrong order

NEW QUESTION 41
Refer to the exhibit.

An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization’s finance department but is unable to. What is the problem?

The IT training rule is taking precedence over the IT Admins rule.

The authorization conditions wrongly allow IT Admins group no access to finance devices.

The finance location is not a condition in the policy set.

The authorization policy doesn’t correctly grant them access to the finance devices.

NEW QUESTION 42
A network administrator is configuring client provisioning resource policies for client machines and must ensure that an agent pop-up is presented to the client when attempting to connect to the network Which configuration item needs to be added to allow for this’?

the client provisioning URL in the authorization policy

a temporal agent that gets installed onto the system

a remote posture agent proxying the network connection

an API connection back to the client

NEW QUESTION 43
A network engineer must enforce access control using special tags, without re-engineering the network design. Which feature should be configured to achieve this in a scalable manner?

SGT

dACL

VLAN

RBAC

NEW QUESTION 44
Select and Place

NEW QUESTION 45
An engineer is configuring web authentication using non-standard ports and needs the switch to redirect traffic to the correct port. Which command should be used to accomplish this task?

permit tcp any any eq <port number>

aaa group server radius proxy

ip http port <port number>

aaa group server radius

NEW QUESTION 46
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.

NEW QUESTION 47
Which two fields are available when creating an endpoint on the context visibility page of Cisco IS? (Choose two )

Policy Assignment

Endpoint Family

Identity Group Assignment

Security Group Tag

IP Address

NEW QUESTION 48
Which two task types are included in the Cisco ISE common tasks support for TACACS+ profiles?
(Choose two.)

Firepower

WLC

IOS

ASA

Shell

Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide TACACS+ ProfileTACACS+ profiles control the initial login session of the device administrator. A session refers to each individual authentication, authorization, or accounting request. A session authorization request to a network device elicits an ISE response. The response includes a token that is interpreted by the network device, which limits the commands that may be executed for the duration of a session. The authorization policy for a device administration access service can contain a single shell profile and multiple command sets.
The TACACS+ profile definitions are split into two components:
* Common tasks
* Custom attributes
There are two views in the TACACS+ Profiles page (Work Centers > Device Administration > Policy Elements > Results > TACACS Profiles)-Task Attribute View and Raw View. Common tasks can be entered using the Task Attribute View and custom attributes can be created in the Task Attribute View as well as the Raw View.
The Common Tasks section allows you to select and configure the frequently used attributes for a profile. The attributes that are included here are those defined by the TACACS+ protocol draft specifications. However, the values can be used in the authorization of requests from other services. In the Task Attribute View, the ISE administrator can set the privileges that will be assigned to the device administrator. The common task types are:
* Shell
* WLC
* Nexus
* Generic
The Custom Attributes section allows you to configure additional attributes. It provides a list of attributes that are not recognized by the Common Tasks section. Each definition consists of the attribute name, an indication of whether the attribute is mandatory or optional, and the value for the attribute. In the Raw View, you can enter the mandatory attributes using a equal to (=) sign between the attribute name and its value and optional attributes are entered using an asterisk (*) between the attribute name and its value. The attributes entered in the Raw View are reflected in the Custom Attributes section in the Task Attribute View and vice versa. The Raw View is also used to copy paste the attribute list (for example, another product’s attribute list) from the clipboard onto ISE. Custom attributes can be defined for nonshell services.

NEW QUESTION 49
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.

NEW QUESTION 50
Drag the descriptions on the left onto the components of 802.1X on the right.

NEW QUESTION 51
In which scenario does Cisco ISE allocate an Advanced license?

guest services with dACL enforcement

endpoint authorization using SGA enforcement

dynamic device profiling

high availability Administrator nodes

NEW QUESTION 52
An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants Which portal must the security engineer configure to accomplish this task?

MDM

Client provisioning

My devices

BYOD

NEW QUESTION 53

Refer to the exhibit. Which command is typed within the CLI of a switch to view the troubleshooting output?