[Jun 24, 2024] Achive your Success with Latest Network Appliance NS0-162 Exam [Q45-Q64]

Rate this post

Achive your Success with Latest Network Appliance NS0-162 Exam [Jun 24, 2024]

The NS0-162 Exam Test For Brief Preparation

The NetApp Certified Data Administrator, ONTAP certification obtained by passing the Network Appliance NS0-162 exam is valid for two years. To maintain the certification, candidates must pass a recertification exam or earn NetApp Continuing Education Units (CEUs) by completing relevant training courses. NetApp Certified Data Administrator, ONTAP certification provides proof of a candidate’s expertise in managing and administering data storage systems using NetApp ONTAP software.

NEW QUESTION 45
Which two components are required for committing data to a WORM volume? (Choose two.)

You must create a SnapLock Aggregate.

You must license SnapLock.

You must create a SnapLock SVM.

You must create a SnapLock volume.

NEW QUESTION 46
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)

Configure an authentication tunnel through an admin SVM.

Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.

Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.

Configure an authentication tunnel through an existing CIFS SVM.

NEW QUESTION 47
Auditing has been enabled and configured on your ONTAP storage system. You have also created audit policies to monitor files and folders. Auditing has been running for over six months. You want to ensure that there have been no improper file access attempts.
How would you accomplish this task?

Import EVTX files into Microsoft SQL.

Import EVTX files Into Microsoft Event Viewer.

Use Microsoft System Center to read EVTX files.

Use the Active IQ Web site to read EVTX files.

NEW QUESTION 48
Auditing has been enabled and configured on your ONTAP storage system. You have also created audit policies to monitor files and folders. Auditing has been running for over six months. You want to ensure that there have been no improper file access attempts.
How would you accomplish this task?

Import EVTX files into Microsoft SQL.

Import EVTX files Into Microsoft Event Viewer.

Use Microsoft System Center to read EVTX files.

Use the Active IQ Web site to read EVTX files.

NEW QUESTION 49
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8. In this scenario, which two statements are true? (Choose two.)

Use XCP to copy data from a FlexVol to a FlexGroup.

Use SnapMirror to replicate data from FlexVol to FlexGroup.

You can convert the FlexVol volume to a FlexGroup volume.

A FlexVol to FlexGroup conversion is not supported.

NEW QUESTION 50
You ate the administrator of an ONTAP 9.8 cluster. You have configured an hourly snapshot schedule for all NAS volumes. One of your users accidentally deleted an Important spreadsheet file on an SMB share. The file needs to be restored as quickly as possible by the Windows user.
Which statement is correct in this scenario?

On the cluster CLI, execute the volume clone create command with the -parent-snapshot option set to the latest Snapshot copy and share the cloned volume as an SMB share, then copy the file back.

On the cluster CLI, execute the volume snapshot restore-file command with the options to select the Snapshot, path, and restore-path

In ONTAP System Manager, navigate to the volume where the share resides, click on snapshot copies and restore the latest Snapshot copy.

In Windows Explorer, right-click on the SMB share where the file was deleted, go to previous versions select the file and copy It to the original location.

NEW QUESTION 51
Exhibit.

You have an SVM-DR relationship as shown in the exhibit. You are given a new requirement to use SnapMirror Synchronous (SMS) for the data volumes In NFS-SVM-01.
In this scenario, which solution Is supported to enable SMS in ONTAP 9.8 software?

Set up new SM-S relationships from the AFF A220 to a new destination.

Set up new SM-S relationships from the FAS2720 to a new destination.

Set up NetApp Cloud Sync with a cloud broker in AWS to replicate to a new destination.

Modify the existing SVM-DR policy to use sync mode.

NEW QUESTION 52
Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

FC has not been licensed on the cluster.

NVMe Is not configured for the SVM.

FC switch zoning has not been done correctly.

NVMe is not licensed on the cluster.

NEW QUESTION 53
You ate attempting to establish a SnapMlrror relationship between your ONTAP cluster (AcmeClusOl) and a partner company’s ONTAP cluster (WidgetsClusOl). The clusters are unable to establish a peering relationship. You perform a packet capture on WldgetsClusOl and do not see any packets from AcmeClusOl.
You also discover that the IP subnet that Is used for WidgetsClusOl’s intercluster LIFs overlaps with a local subnet at your company.
In this scenario, which feature would enable AcmeClusOl and WidgetsClusOl to peer with each other?

VLANs

broadcast domains

IPspaces

ONTAP subnets

NEW QUESTION 54
Exhibit.

You create a storage virtual machine (SVM) called SVM500 that is provisioned for iSCSI. After creating a LUN in the SVM and mapping it to an igroup, the attached VMware hosts are unable to mount the LUN.
Referring to the exhibit, what is the issue?

The igroup contains the wrong protocol.

The igroup contains multiple Initiators.

The initiator is a member of igroups of different OS types.

The igroup does not contain the appropriate initiators.

NEW QUESTION 55
Exhibit.

After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?

the subnet-name option

the failover-policy option

the auto-revert option

the data-protocol option

NEW QUESTION 56
On FAS systems, FlexCache volumes are typically used for which type of workload?

read-intensive NAS workloads

write-intensive SAN workloads

read-intensive SAN workloads

write-intensive NAS workloads

NEW QUESTION 57
Node A has taken over Node B.
You solved the issue that caused the takeover and are now ready to resume normal operation.
After initiating the storage failover giveback command, how are the aggregates given back?

CF0 aggregates are automatically given back, SFO aggregates must be manually given back.

The root aggregate is automatically given back, CFO and SFO aggregates must be manually given back.

CFO aggregates and SF0 aggregates are automatically given back.

SFO aggregates are automatically given back, CFO aggregates must be manually given back.

NEW QUESTION 58
Which configuration Is supported using NetApp’s All SAN Array (ASA)?

24-node cluster

single node cluster

2-node cluster

12-node cluster

NEW QUESTION 59
Which three protocols are supported by NetApp ONTAP Select? (Choose three.)

NFS

SCSI

NVMe

FCP

CIFS

NEW QUESTION 60
Exhibit.

A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?

The host IP address does not match the export policy rule.

The volume is in read-only.

The volume is not mounted In the namespace.

The logical Interface does not allow the NFSv3 protocol.

NEW QUESTION 61
A volume Is set to use Adaptive QoS with the default policy.
In this scenario, which change would affect the QoS throughput ceiling?

Data is added to the volume.

Disks are added to the volume’s aggregate.

More clients access the volume.

The volume Is resized.

NEW QUESTION 62
An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?

SyncMlrror

SnapMirror Business Continuity (SM-BC)

SVM Disaster Recovery (SVM DR)

SnapMirror Synchronous (SMS)

NEW QUESTION 63
Exhibit

You have Installed a new ONTAP 9.8 cluster and want to move the e0e and e0c ports into a new broadcast domain. Referring to the exhibit, which action satisfies this requirement?

Use the irrDadcast-domain create command

Use the broadcast-domain split command.

Use ONTAP System Manager to create a new broadcast domain.

Use the broadcast-domainmerge command.

NEW QUESTION 64
Click the Exhibit button.
You are planning to present storage to your servers from your AFF system using the FC protocol. You have a pair of Fc switches to ensure connectivity and you have decided to use WWPN zoning.
Referring to the exhibit, which two WWPNs do you use for your configuration? (Choose two.)

fc-1 WWPN

fc-2 WWPN

0d WWPN

0c WWPN

Network Appliance NS0-162 certification exam is one of the most sought-after certifications in the IT industry. It is designed to test the skills and knowledge of IT professionals in managing and administering data storage solutions using NetApp ONTAP software. NetApp Certified Data Administrator, ONTAP certification exam is designed to validate the skills of individuals in configuring, managing, and troubleshooting NetApp ONTAP data storage systems.

Revolutionary Guide To Exam Network Appliance Dumps: https://www.test4cram.com/NS0-162_real-exam-dumps.html

Leave a Reply Cancel reply