[Q136-Q157] Get Special Discount Offer on 300-710 Dumps PDF [UPDATED Jul-2025]

Rate this post

Get Special Discount Offer on 300-710 Dumps PDF [UPDATED Jul-2025]

PDF Download Cisco Test To Gain Brilliante Result!

Earning the Cisco 300-710 certification can demonstrate a candidate’s expertise in securing enterprise networks with Cisco Firepower, which is a valuable skillset in today’s cybersecurity landscape. Securing Networks with Cisco Firepower certification can also lead to career advancement opportunities and increased earning potential in the field of network security.

Cisco 300-710 exam, also known as Securing Networks with Cisco Firepower (SNCF), is a certification exam that focuses on the implementation and management of advanced security features using Cisco Firepower Next-Generation Firewall (NGFW), as well as Cisco Firepower Management Center (FMC). 300-710 exam is designed for network security engineers who are responsible for implementing and maintaining Cisco Firepower solutions in their organizations. The Cisco 300-710 exam is a part of the CCNP Security certification track, and passing 300-710 exam is one of the requirements for obtaining the CCNP Security certification.

NEW QUESTION 136
An engineer runs the command restore remote-manager-backup location 2.2.2.2 admin /Volume/home/admin FTD408566513.zip on a Cisco FMC. After connecting to the repository, the Cisco FTD device is unable to accept the backup file. What is the reason for this failure?

The backup file is not in .cfg format.

The wrong IP address is used.

The backup file extension was changed from .tar to .zip.

The directory location is incorrect.

NEW QUESTION 137
Which two actions can be used in an access control policy rule? (Choose two.)

Block with Reset

Monitor

Analyze

Discover

Block ALL

NEW QUESTION 138
Which CLI command is used to control special handling of ClientHello messages?

system support ssl-client-hello-tuning

system support ssl-client-hello-display

system support ssl-client-hello-force-reset

system support ssl-client-hello-enabled

NEW QUESTION 139
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.

NEW QUESTION 140
What is a characteristic of bridge groups on a Cisco FTD?

In routed firewall mode, routing between bridge groups must pass through a routed interface.

In routed firewall mode, routing between bridge groups is supported.

In transparent firewall mode, routing between bridge groups is supported

Routing between bridge groups is achieved only with a router-on-a-stick configuration on a connected router

NEW QUESTION 141
An engineer is using the configure manager add <FMC IP> Cisc404225383 command to add a new Cisco FTD device to the Cisco FMC; however, the device is not being added. Why is this occurring?

DONOTRESOLVE must be added to the command

The IP address used should be that of the Cisco FTD, not the Cisco FMC

The registration key is missing from the command

The NAT ID is required since the Cisco FMC is behind a NAT device

NEW QUESTION 142
An engineer is monitoring network traffic from their sales and product development departments, which are on two separate networks.
What must be configured in order to maintain data privacy for both departments?

Use a dedicated IPS inline set for each department to maintain traffic separation

Use 802.1Q mime set Trunk interfaces with VLANs to maintain logical traffic separation

Use passive IDS ports for both departments

Use one pair of inline set in TAP mode for both departments

NEW QUESTION 143
Which default action setting in a Cisco FTD Access Control Policy allows all traffic from an undefined application to pass without Snort Inspection?

Trust All Traffic

Inherit from Base Policy

Network Discovery Only

Intrusion Prevention

NEW QUESTION 144

Refer to the exhibit. An engineer configures a NAT rule allowing clients to use the internet only if clients are located on the directly connected internal network. Dynamic auto PAT must be configured. Drag and drop the NAT rules from the left onto the corresponding targets on the right. Not all options are used.

NEW QUESTION 145
Refer to the exhibit.

A Cisco Secure Firewall Threat Defense (FTD) device is deployed in inline mode with an inline set. The network engineer wants router R2 to remove the directly connected route M 68.1.0/24 from its routing table when the cable between routed R1 and the Secure FTD device Is disconnected. Which action must the engineer take?
1

Implement the Propagate Link Stale option on the Secure FTD device

Establish a routing protocol between R1 and R2.

Disable hardware bypass on the Secure FTD device.

Implement autostate functionality on the Gi0/2 interface of R2

NEW QUESTION 146
Which two deployment types support high availability? (Choose two.)

transparent

routed

clustered

intra-chassis multi-instance

virtual appliance in public cloud

NEW QUESTION 147
A network administrator needs to create a policy on Cisco Firepower to fast-path traffic to avoid Layer 7 inspection. The rate at which traffic is inspected must be optimized. What must be done to achieve this goal?

Enable the FXOS for multi-instance.

Configure a prefilter policy.

Configure modular policy framework.

Disable TCP inspection.

NEW QUESTION 148
An engineer is setting up a new Cisco Secure Firewall Threat Defense appliance to replace the current firewall. The company requests that inline sets be used and that when one interface in an inline set goes down, the second interface in the inline set goes down. What must the engineer configure to meet the deployment requirements?

propagate link state

Snort fail open

inline tap mode

strict TCP enforcement

NEW QUESTION 149
Which protocol establishes network redundancy in a switched Firepower device deployment?

STP

HSRP

GLBP

VRRP

NEW QUESTION 150
An administrator is configuring their transparent Cisco FTD device to receive ERSPAN traffic from multiple switches on a passive port, but the Cisco FTD is not processing the traffic. What is the problem?

The switches do not have Layer 3 connectivity to the FTD device for GRE traffic transmission.

The switches were not set up with a monitor session ID that matches the flow ID defined on the Cisco FTD.

The Cisco FTD must be in routed mode to process ERSPAN traffic.

The Cisco FTD must be configured with an ERSPAN port not a passive port.

NEW QUESTION 151
Which two conditions are necessary for high availability to function between two Cisco FTD devices? (Choose two.)

The units must be the same version

Both devices can be part of a different group that must be in the same domain when configured within the FMC.

The units must be different models if they are part of the same series.

The units must be configured only for firewall routed mode.

The units must be the same model.

NEW QUESTION 152
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.

NEW QUESTION 153
An administrator is working on a migration from Cisco ASA to the Cisco FTD appliance and needs to test the rules without disrupting the traffic. Which policy type should be used to configure the ASA rules during this phase of the migration?

identity

Intrusion

Access Control

Prefilter

NEW QUESTION 154
An engineer is investigating connectivity problems on Cisco Firepower that is using service group tags. Specific devices are not being tagged correctly, which is preventing clients from using the proper policies when going through the firewall How is this issue resolved?

Use traceroute with advanced options.

Use Wireshark with an IP subnet filter.

Use a packet capture with match criteria.

Use a packet sniffer with correct filtering

NEW QUESTION 155
An engineer is troubleshooting a device that cannot connect to a web server. The connection is initiated from the Cisco FTD inside interface and attempting to reach 10.0.1.100 over the non- standard port of 9443. The host the engineer is attempting the connection from is at the IP address of 10.20.10.20. In order to determine what is happening to the packets on the network, the engineer decides to use the FTD packet capture tool.
Which capture configuration should be used to gather the information needed to troubleshoot this issue?

NEW QUESTION 156
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation.
How will this issue be addresses globally in the quickest way possible and with the least amount of impact?

by denying outbound web access

Cisco Talos will automatically update the policies.

by Isolating the endpoint

by creating a URL object in the policy to block the website

NEW QUESTION 157
Which component is needed to perform rapid threat containment with Cisco FMC?

ISE

RESTful API

SIEM

DDI