[Sep-2025] Latest Oracle 1z0-1066-24 Certification Practice Test Questions [Q43-Q66]

NO.43 Planner 1 works in Europe and needs to see three measures in kilograms (the default UOM). Planner 2 is US-based and needs to see those same three measures in pounds. Both planners need to use five tables in their plan analyses on a regular basis. At the moment, all five tables are displayed in kilograms.
Which two options would most efficiently address this requirement?

Create duplicates of the three measures in Manage Planning Measures and change each new measure’s UOM from kilograms to pounds, then duplicate the five tables but use the new measures.

There is no efficient solution to this requirement.

Open each table and format measures to duplicate the three measures and then format the duplicated measures to be displayed in pounds.

Planner 2 opens a table, formats each measure to be displayed in pounds. When Planner 1 opens the same table, they reformat back to be displayed in kilograms.

Duplicate all five tables, then format the three measures in the copied tables to be displayed in pounds.

NO.44 As a new planner, you want to test simulation set functionality. You have created a simulation set named ‘Test Simulation Set.’ In this simulation set, you have already added Item 98573. You would like to change the item specification ‘Fixed Order Quantity’ to 10 within this simulation set.
Which sequence will allow you to accomplish this task?

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘Action’ > Select ‘Edit’ > Find Fixed Order Quantity specification> under the ‘Action’ column select ‘set value as’ > under the ‘Value’ column enter 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘View’ > Select ‘Columns’ > Check box next to Fixed Order Quantity specification> the ‘Fixed Order Quantity’ will now show on the Item 98573 line > Highlight line for Item 98573 and scroll right until you find ‘Fixed Order Quantity’ > Change value to 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight item > Select ‘Action’ > Select ‘Edit’ > Find Fixed Order Quantity specification> under the ‘Action’ column select ‘reset to original’ > under the ‘Value’ column enter 10

Select and open ‘Test Simulation Set’ > Search and select Item 98573 > Highlight line for Item 98573 and scroll right until you find ‘Fixed Order Quantity’ > Change value to 10

NO.45 What does the Advanced Plan Option check box “Consider currency conversion rates to plan revenue” do?

It enables backlog plans to prioritize constrained products based on higher price and to consider exchange rates.

For supply and sales and operations plans, it enables prioritization of constrained products based on higher price and to consider exchange rates.

It enables supply plans with planning method constrained to prioritize constrained products based on higher price and to consider exchange rates.

It enables sales and operations plans with constrained products to prioritize products based on higher price and to consider exchange rates.

NO.46 Planners are complaining about getting too many exception messages, some of which have minima value for evaluating plan health.
Which three solutions could reduce message clutter? (Choose three.)

Go to Configure Exceptions, and specify a threshold for various messages.

Go to Configure Exception Sets, and for the currently used exception set. specify a threshold for various messages.

Go to Configure Exception Sets, duplicate the currently used exception set, remove the undesired messages from the duplicate set. then assign the duplicate set to all plans.

Go to Configure Exception Sets, create a new set with only the messages the planners care about, and then, set all supply plans to use this new exception set.

NO.47 You want to understand what your inventory turns are for your organization. Where can you see this information in Planning Central?

Manage Planning Analytics

Manage Planning Measures

View Planning Analytics

Manage Metrics

Plan Summary

NO.48 Which two are valid settings when defining a replenishment planning cluster?

Location hierarchy (required)

Sweep location (required)

Reserved safety stock percentage (optional)

Source system (required)

NO.49 Demand is high leading up to the Christmas holiday every year between Dec 20 and Dec 24 and not on Christmas day (Dec 25). Your customer has two demand plans. Describe the steps to model Christmas causal factor in both demand plans.

Open a demand plan and add a new customer specific Christmas causal factor. Create a table displaying the causal factor measure and relevant time period and modify as required. Causal factor changes in this demand plan will reflect in the 2nd demand plan also.

Open a demand plan and add a new customer specific Christmas causal factor. Create a table displaying the causal factor measure and relevant time period and modify as required. Causal factor changes are plan specific, so repeat the steps in the 2nd demand plan.

Use FBDI to create a new customer specific Christmas causal factor. Place value of 1 from Dec 20 to Dec 34. Causal factor upload to one demand plan will reflect in the 2nd demand plan also.

Use FBDI to create a new customer specific Christmas causal factor. Place value of 1 from Dec 20 to Dec 24. Causal factor changes are plan specific, so repeat the steps in the 2nd demand plan.

Open a demand plan and edit Christmas casual factor measure. Place value of one from Dec 20 to Dec 24 and zero for non-impacted days including Dec 25. Causal factor changes in this demand plan will reflect in the 2nd demand plan also.

Open a demand plan and edit Christmas casual factor measure. Place value of one from Dec 20 to Dec 24 and zero for non-impacted days including Dec 25. Causal factor changes are plan specific, so repeat the steps in the 2nd demand plan.

NO.50 When duplicating a supply plan, which parameters can you modify if Copy Type is “copy plan options only”?

Name, Access. Owner, and Notes

Name, Description. Access (but if the original plan was private, you can’t edit the Users list), and Notes

Name, Description. Access. Supply Planning Mode, and Owner

Name, Description. Access. Owner. Include Archive, and Notes

NO.51 You ran a demand plan with the data refresh option “Do not refresh with current data.” Identify two true statements. (Choose two.)

Shipments history data will not be modified.

Forecasting engine will run without advancing the plan date.

Shipments forecast data will not be modified.

Forecasting engine will not run.

Shipments history data will be updated.

NO.52 Which statement is NOT true about item attributes?

The “forecast control” item attribute must be assigned if configure-to-order (CTO) items are being planned.

Many item attributes can be overridden as part of a simulation set that gets applied to a plan.

Some item attributes can be overridden directly in the Items table for simulation purposes.

Supply plans ignore items with the “planning method” attribute set to MPP.

NO.53 The five pre-configured review stages of a Sales and Operations Planning process are Product Review, Demand Review, Supply Review, Financial Review, and Executive Review.
If Product Review is NOT an integral part of your company’s S&OP process, how do you configure the system to ignore it?

In Manage Planning Cycles, right-click the Product Review tab. and select Delete.

It is not possible to ignore any of the 5 pre-configured review stages.

In Manage Planning Cycles, do not add any participants or tasks for the Product Review stage.

In Manage Planning Cycles, go to the Actions menu, select Configure Stages, and set Enabled for Product Review to No.

NO.54 Should value in Adjusted Shipments Forecast measure always be equal to the Final Shipments Forecast measure?

Yes, if the adjustment is made below the aggregation level at which it is viewed.

Yes,if the adjustment is made at the same aggregation level at which itis viewed, or below.

No, both measures will always be different.

Yes,if the demand plan is approved and values are locked.

Yes,if the demand plan hasn’t been run again after adjustment.

NO.55 Your company needs to implement project-driven supply planning, along with demand and supply netting based on the country of origin. Which setup task is needed for this?

Manage Demand and Supply Netting Rules task

Manage Attribute-Based Netting Rules task

Manage Project Netting Rules task

Manage Attribute and Project Netting Rules task

NO.56 Which list of parameters is available for selection when you run the Start Backlog Planning scheduled process?

Priority Rule. Organization. Demand Class, Item. Customer

Demand Priority Rule. Organization. Demand Class. Item. Customer

Backlog Priority Rule. Organization. Category. Item. Customer

Demand Priority Rule. Organization. Category. Item, Customer

NO.57 Segmentation was last run many months ago and the replenishment planner is concerned about losing track of items whose policies get changed due to the upcoming resegmentation. There are also a lot of manually assigned segments that must be preserved. Which two approaches for Execute Segmentation should you use in this planner?

Save the last segmentation result should be selected.

No other setting is needed.

Auto-approve segmentation changes should not be selected.

Retain segment overrides should be selected.

NO.58 Which type of data in the Supply Network Model is not collected, but is accessed through a view used by Planning?

Supplier data

Customer data

Organization data

Carrier data

NO.59 During a client implementation, it is determined that an external forecast will need to be imported into Planning Central for use as a Demand Schedule in a Supply Plan.
What three steps must be executed to enable the successful load of the External Forecast file? (Choose three.)

CSV file must be generated.

Collect Planning Data Process must be run from Planning.

Collect Legacy Data Process must be run from Planning.

Load Interface File for Import Process must be run.

Flat File must be zipped.

NO.60 You’ve decided to opt into the Customer Demand Collaboration feature. Which three statements describe what that enables?

A customer can use B2B messaging to share their expected needs and historical consumption for the products you sell them.

The information they share with you is informational and only available to you in the portal.

A customer can log in to a portal and manually enter their expected needs for the products you sell them.

You can post to the portal your statistical forecast for the products you sell them so they can see your forecast for them.

NO.61 Your client has operations in the west coast of the US. If the customer is in the western half of the US, then they would like to ship the product from their warehouses. If it’s in the eastern half of the US, then they want to drop ship it from a supplier.
How would you recommend they set the assignment up?

Set up a region for the west coast warehouse and an item-region level assignment for the drop ship.

Set up two region level assignments, one for the west coast and the other for the east coast.

Set up by each customer for the customers who should get product from each warehouse.

Set up an item-region assignment for the west coast warehouse and a region level assignment for the drop ship.

Set up an item-organization assignment for the west coast warehouse and an item-organization level assignment for the drop ship.

NO.62 A major distributor experiences difficulty in establishing an inventory replenishment methodology. Which segmentation approach is not possible with Replenishment Planning?

to group items based on item attributes for the product and customer dimensions and then assign a replenishment policy to each group

to group items based on user-defined attributes and then assign a replenishment policy to each group

to group items based on similar global consumption levels and then assign a replenishment policy to each group

to group items based on similar consumption levels by warehouse and then assign a replenishment policy to each group

NO.63 Your client wants their supply plans to have a customized group of exceptions. What two steps must you complete in order to make sure only these exceptions are included when running all of your client’s supply plans? (Choose two.)

Manage Plans > Select each supply plan > Edit each supply plan > Manually add each exception specified by client

Configure Exceptions > Expand Supply Planning Exceptions > Highlight lines with exceptions specified by client > Click ‘Add to Exception Set’

Configure Exception Sets > Create exception set > Add exceptions specified by client

Select ‘Add to Supply Plan’ button > Select which supply plans you want to have this group of exceptions

Manage Plans > Select each supply plan > Edit each supply plan > Add your exception set to Plan Options for each supply plan

NO.64 When running the Publish Order Forecast scheduled process, what is the minimum set of parameters needed to publish additional measures such as requisition and purchase order data?

Publish order details

Include requisitions in the order forecast, “Include purchase orders in the order forecast”, and “Publish order details”

Include purchase orders in the order forecast

Include requisitions in the order forecast, “Include purchase orders in the order forecast”, and “Publish purchasing details”

NO.65 What is one method of associating a Safety Stock Quantity value to an item?

Upload the value using File Based Data Import (FBDI)

Enter your value in the Safety Stock Quantity column in the Items page.

Run the Safety Stock Quantity Update Process.

Enter your value in the Safety Stock Quantity Override column in the Items page.

NO.66 You’ve decided to opt into the Customer Demand Collaboration feature. Which three statements describe what that enables?

A customer can use B2B messaging to share their expected needs and historical consumption for the products you sell them.

The information they share with you is informational and only available to you in the portal.

A customer can log in to a portal and manually enter their expected needs for the products you sell them.

You can post to the portal your statistical forecast for the products you sell them so they can see your forecast for them.

Leave a Reply Cancel reply