[Q38-Q55] Real 1z0-133 dumps – Real Oracle dumps PDF in here [Jul-2022]

Rate this post

Real 1z0-133 dumps – Real Oracle dumps PDF in here [Jul-2022]

Realistic Test4Cram 1z0-133 Dumps PDF – 100% Passing Guarantee

Q38. The Administration Server of a domain falls due to a hardware failure. The hardware is beyond repair.
Before the failure you prepared a “backup admin server”. You go through your planned recovery process and are successful. The Administration Server is now running on different hardware. The managed servers of the domain automatically reconnect to the admin server.
Select the two statements that are true.

Files of deployed applications are available to the backup admin server from the same relative location as they were to the original admin server.

At the time of the failure ,the backup admin server was running in “Standby” mode on different hardware in the same network.

When the admin server failed, you must have shut down and restarted the managed servers, otherwise they could not have reconnected to the failed admin server.

The backup admin server is any one of the running managed servers. You select one of the managed servers, stop it, set its “administration” flag, and restart it as the admin server of the domain.

The backup admin server must be running at the same DNS name or IP address as the original.

Q39. You use the Java -based Node Manager to start your managed servers. You want Node Manager to:
Stop servers by using your custom stop script : mystopit.sh
Restart servers when the hardware cases
Use SSL communication
Check server heath once per second
Below are portions of the node manager. properties file. Select the one that configures Node manager as described.

StopScriptEnabled=true StopScriptName=mystopic.sh CrashRestartEnabled=true SecureListtenser=true StateCheckinterval=1000

StopsScriptEnabled=true StopScriptName=mystopit.sh CrashRestartEnabled=true SecureListener=true StataCheckInterval=1

StopscriptEnabled=true StopScriptName=topic-sh CrashRecoveryEnabled=true SecureListtener=true Statecheckinterval=1000

StopScript=true StopscriptName=mystopit.sh CrashRecoveryEnabled=true SecureListtenser=true

stopscriptenabled=true Stopscriptname=mystopit.sh crashRecoveryEnabled=true secureListener=SSL statecheckinterval=1000

Q40. You are troubleshooting Java Transaction API (JTA) transactions.
The WebLogic Server extension to JTA provides which optional transaction attribute to make troubleshooting easier?

a name

an ID

the status of “marked for rollback”

a status

Q41. A WebLogic Server instance can have multiple network channel for it.
Each channel for the server must have a unique combination of two element. Identify these two elements.

Tunneling enabled

Listen address

Listen port

Channel weight

Q42. You are troubleshooting Java Transaction API (JTA) transactions.
The WebLogic Server extension to JTA provides which optional transaction attribute to make troubleshooting easier?

a name

an ID

the status of “marked for rollback”

a status

Q43. You see a script called start WebLogic.sh(.cmd in Windows) in the root folder of your domain.
What does this script do?

Starts a machine

Starts Node Manager

Starts a Managed server

Calls the startwebLogic.sh script in the domain’s bin directory

Calls the startManagedWebLogic.sh script in the domains bin directory

Q44. Youcreated a shutdown class Myclass that you wouldlike to executejustbefore server shutdown.
Whichstatementis true regarding Myclass?

MyclasscanbespecifiedintheConfigurationWizardas ashutdownclass.

Myclassmust beavailable in the WebLogic server’sclasspath.

Myclasscan be targeted toonly one serverinstance.

Myclassmustnothavea mainmethod.

Q45. Your server includes an application that users a generic JDBC data source to connect to a database. However, the network connection between the server and the database is not 100% reliable.
Identify two data source attributes that, if set properly can help avoid situations in which the application fails due to a failed JDBC connection.

Statement Cache Type

Pool Reserve Mode

Test Table Name

Test Connection Mode

Test Connections on Reserve

Q46. Which three tasks can be performed by the Node Manager? (Choose three.)

Start a server

Define a new server

Host the Node Manager console.

Automatically restart a failed server.

Kill a failed application on a server.

Kill a server process that did not shut down property.

Q47. A WebLogic server domain contains a dynamic cluster called “cluster1”.The cluster “cluster”1 has two
dynamic managed servers “server1” and “server2”. There is a need to view the inherited attribute values
for “server2”.
How do you view all attributes of “server2”.including those inherited from the server template?

Use WebLogic Administration console >”server2″ link.

Use java weblogic.Deployer.

You cannot, because attribute values are not inherited.

Use WLST.

Q48. Which action should you take to automatically back up the domain configuration when anyone Activates a configuration change?

USE the backup=’true’ parameter of the ad activate () command In WLST.

The administration console , select ” Follow Configuration changes” In the Shared preferences for the console.

In the administration console, select “Configuration Archive Enabled” under the general configuration of the domain.

Enabling automatic domain configuration creates backups of the configuration during server boot not at each activation.

Q49. You zipped up the domain’s config directory on the administration server’s machine before making some major configuration changes. You wait to activate after all the changes have been saved. After your changes are in, things start failing badly. You want to go back to the old configuration.
What is the best course of action?

Undo the changes you made manually by using the administration console or WLST.

1. Stop the administration server. 2. Replace the config directory on the administration server’s machine with your backup. 3. Restart the administration server.4. Stop the managed servers on each machine.5.
Replace the config directory on the machine with your backup.6. Restart the managed servers on the machine.

1. Stop the administration server.2. Extract only the config.xm1 file from the zip file.3. Overwrite config.xm1 on the administration server’s machine with this extracted file.4. Restart the administration server.

1. Stop the administration server.2. Replace the config directory on the administration server’s machine with your backup.3. Restart the administration server.

Q50. You are setting up a GridLink Datasource.
What function will help you to seamlessly connect to a dynamic oracle RAC installation

Simple Connection Access Node

Single Connection Anonymous Network

Simple Client access Address Name

Single Client Access name

Q51. The Administration Server of a domain fails due to a hardware failure. The hardware is beyond repair.
Before the failure you prepared a “backup admin server”. You go through your planned recovery process and are successful. The Administration Server is now running on different hardware. The managed servers of the domain automatically reconnect to the admin server.
Select the two statements that are true. (Choose two.)

Files of deployed applications are available to the backup admin server from the same relative location as they were to the original admin server.

At the time of the failure, the backup admin server was running in “Standby” mode on different hardware in the same network.

When the admin server failed, you must have shut down and restarted the managed servers, otherwise they could not have reconnected to the failed admin server.

The backup admin server is any one of the running managed servers. You select one of the managed servers, stop it, set its “administration” flag, and restart it as the admin server of the domain.

The backup admin server must be running at the same DNS name or IP address as the original.

Q52. You are creating and configuring a cluster by using the administration console. Which two statements are true?

All servers that will be part of the cluster must be created before the cluster is created.

You must pick the cluster messaging mode.

Even though you create a non dynamic cluster, you can change it to a dynamic cluster later.

Once the cluster is created, you cannot change its messaging mode.

The administration console does not provide a way to manually migrate singleton services. It must be set up to be done automatically or by using WLST.

Q53. You need to take a web application offline.
Which three options are supported In WebLogic Server when you stop a running application?

Terminate HTTP sessions immediately.

Terminate HTTP sessions after three minutes .

Move HTTP sessions to a database.

Wait for HTTP sessions to time out.

Allow new requests only through the administration port.

Move in -progress requests to another server in the cluster.

Q54. Which three statements about patching Web Logic server (WLS) by using OPatch are true?

Each patch comes with a “read me” file containing installation instructions.

You can use OPatch to see which patches are currently applied to WebLogic server.

OPatch is a GUI tool and requires the operating system to have a window manager.

OPatch requires a JDK to run.

After installing WLS, you download the OPath utility from Oracle Support.

Each patch ZIP file comes with the OPatch utility.

Q55. Youare in the process of planning a deployment in which a single WebLogiccluster will host a web application. There are several options to consider.
Whichis not a valid decision?

Proxyplug-inorhardwareload balancer

Configured or dynamic cluster

ReplicatedorpersistentHTTP sessions

Unicast or multicast communication

Single or multiple domains