Provide HP HPE6-A75 Practice Test Engine for Preparation [Q25-Q40]

Rate this post

Provide HP HPE6-A75 Practice Test Engine for Preparation

Detailed New HPE6-A75 Exam Questions for Concept Clearance

NO.25 Refer to the exhibit.

Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?

The metric on the VLAN 1000 interface is too low.

Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.

OSPF routing switches choose the best intra-area routes based on Area 1 links only.

The link between Switch-1 and Switch-2 has gone down.

NO.26 Which technologies can prevent split brain in a VSF fabric that includes Aruba 2930F switches?

ARP MAD or OOBM MAD

VLAN MAD or ARP MAD

OOBM MAD or LLDP MAD

LLDP MAD or VLAN MAD

NO.27 An administrator deploys Aruba Mobility Controller 7005s to a company’s branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?

no console enable

no mgmt-user console

mgmt-user console-block

console disable

NO.28 Refer to the exhibit.

Based on the configuration for the client’s certificate private key as shown, which statements accurately describe the settings? (Select two.)

More bits in the private key will increase security.

The private key for TLS client certificates is not created.

The private key is stored in the ClearPass server.

More bits in the private key will reduce security.

The private key is stored in the user device.

NO.29 Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

NO.30 Refer to the exhibit.

Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?

a hardware issue, such as a broken cable

asymmetric routing introduced by a routing configuration error

an issue with queuing, caused by mismatched QoS settings

mismatched IP addresses on the VLAN for the link

NO.31 An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users’ traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

Per-user tunneled node

Split-tunneled mode

Per-port tunneled node

VLAN tunneled mode

NO.32 Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

NO.33 An administrator mistakenly configures the wrong VLAN setting on a managed controller’s interface. This causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?

disaster recovery

auto-rollback

restore config

bulk configuration

NO.34 Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?

To send a RADIUS CoA message from the ClearPass server to the client

To disconnect the user for 30 seconds when they are in an unhealthy posture state

To blacklist the user when they are in an unhealthy posture state

To force the user to re-authenticate and run through the service flow again

To remediate the client applications and firewall do that updates can be installed

NO.35 Refer to the exhibit.

An administrator implements AP licensing on a Mobility Master (MM).
* Each campus is responsible to purchase its own AP licenses.
* There are 900 AP licenses deployed in the global pool
* There are three dedicated pools.
* From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

Allow CampusA to share from the CampusC pool.

Add 100 more AP licenses and assign them to the CampusA pool.

Move 100 licenses from the CampusC pool to the global pool.

Add 100 more AP licenses to the global pool.

NO.36 Refer to the exhibit.

Controllers are configured m a cluster as shown in the exhibit. These are the network details.
* A Mobility Master (MM) manages the cluster.
* The cluster contains two controllers: C l and C2.
* API and AP2 use CI as their Active AP Anchor Controller (A-AAC). with C2 as their Standby AAC (S-AAC).
* AP3 and AP4 use C2 as their A-AAC, with CI as their S-AAC.
User1 establishes a wireless connection via API, where the Active User Anchor Controller (A-UAC) assigned is CI. with C2 as the standby. What happens when User I roams the wireless network and eventually their session is handled by AP3?

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C1.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C1.

NO.37 Refer to the exhibit.

The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down. What should the administrator do?

Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.

Lower the dead timer on the BDR of VLAN 100.

Lower the hello timer only on the BDR of VLAN 100.

Configure graceful restart on all of the OSPF routing devices on VLAN 100.

NO.38 A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company. Which action rs likely to be the most useful to perform the task?

Access the Network Device view on ClearPass.

Use the configuration audit tool on AirWave.

View the current running config on each switch.

View usage patterns on the switches on AirWave.

NO.39 An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company’s WLAN?

AirMatch

Clustering

ARM

Zones

NO.40 Refer to the exhibit.

Based on the configuration of the Enforcement Profiles In the Onboard Authorization service shown, which Onboarding action will occur?