[Q19-Q36] The HPE6-A75 PDF Dumps Greatest for the HP Exam Study Guide!

Rate this post

The HPE6-A75 PDF Dumps Greatest for the HP Exam Study Guide!

Read Online HPE6-A75 Test Practice Test Questions Exam Dumps

HP HPE6-A75 (Aruba Certified Edge Professional) certification exam is an excellent way for IT professionals to demonstrate their expertise in the field of wireless networking and Aruba technologies. By obtaining this certification, you will be able to demonstrate your skills and knowledge to potential employers, which can help you advance your career in this exciting and rapidly growing field.

HPE6-A75 exam covers a wide range of topics related to Aruba Mobile First Network Solutions, including network fundamentals, wireless LANs, campus LANs, security, and troubleshooting. HPE6-A75 exam also evaluates an individual’s ability to design and implement solutions based on customer requirements, and to use best practices and industry standards to ensure the security and availability of the network.

QUESTION 19
Refer to the exhibit. Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at
10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

QUESTION 20
Refer to the exhibit.

An AD user’s department attribute is configured as *HR”. The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

Executive

iOS Device

Vendor

Remote Employee

HR Local

QUESTION 21
Refer to the exhibit.

Based on the configuration of me create_user form shown, which statement accurately describes the status?

The email field will be visible to guest users when they access the web login page.

The visitor_company field will be visible to operators creating the account.

The visitor_company field will be visible to the guest users when they access the web login page.

The visitor_phone field will be visible to the guest users in the web login page.

The visitor_phone field will be visible to operators creating the account.

QUESTION 22
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

A new Virtual IP address should be created for each NAD.

Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The NAD should be configured with the Virtual IP address for RADIUS authentications on the
802.1x network.

QUESTION 23
What must an OSPF router do when it receives a link state update?

It must participate in a new election for the Designated Router and Backup DR.

It must initiate a graceful restart timer.

It must re-establish adjacency with its Designated Router and Backup DR.

It must run the shortest path first algorithm.

QUESTION 24
Refer to the exhibit.

A network administrator sets up 802.1X authentication to a RADIUS server on an AOS-Switch. The RADIUS server and user devices are both set up to use REAP MSCHAPv2. The administrator tests the authentication and sees the output shown in the exhibit. Which issue could cause this output?

The RADIUS shared secret does not match on the switch and the server.

The administrator entered the wrong password for the test account.

The switch does not have a certificate tor port-access installed on the switch.

The switch port is set for user mode 801. IX. but the RADIUS server is set for port mode.

QUESTION 25
What is a typical reason to implement MAC authentication on an AOS-Switch?

to filter traffic at the edge, based on multiple criteria in the MAC header

to provision switch ports to support devices such as IP phones or printers

to enhance the security of an 802.1X solution

to control management access to the switch CLI based on device, as well as user credentials

QUESTION 26
An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company’s WLAN?

AirMatch

Clustering

ARM

Zones

QUESTION 27
Refer to the exhibits.

The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A1 towards traffic, and A2 blocks traffic.

Both Al and A2 block traffic.

A1 blocks traffic, and A2 forwards traffic.

Both A1 and A2 forward traffic

QUESTION 28
Refer to the exhibit.

The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down.
What should the administrator do?

Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.

Lower the dead timer on the BDR of VLAN 100.

Lower the hello timer only on the BDR of VLAN 100.

Configure graceful restart on all of the OSPF routing devices on VLAN 100.

QUESTION 29
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

When we have to assign a vlan to a wired user on a third party wired switch that doesn’t support RADIUS return attributes.

When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.

When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

When we have to assign a VLAN to a wired user on a third party wired switch that doesn’t support RADIUS authentication.

When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

QUESTION 30
A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company. Which action rs likely to be the most useful to perform the task?

Access the Network Device view on ClearPass.

Use the configuration audit tool on AirWave.

View the current running config on each switch.

View usage patterns on the switches on AirWave.

QUESTION 31
Refer to the exhibit.

mike

We can’t know this from the screenshot above.

Employee

john

QUESTION 32
An AOS-Switch uses tunneled node. What is a best practice for the path between an AOS-Switch and its Mobility Controller?

The path can support jumbo frames

The path has a device that applies NAT

The path implements MACsec

The path crosses no VLAN boundaries

QUESTION 33
A network administrator wants to use Aruba AirWave to audit an AOS-Switch configuration. What rs one requirement?

The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.

The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.

The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.

The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.

QUESTION 34
What is a primary use case for RPVST+ on AOS-Switches?

more granular load balancing than MSTP when access switches connect to two core switches

enhanced loop protection in an MSTP network

integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol

seamless integration with RSTP

QUESTION 35
What are Operator Profiles used for?

to enforce role based access control for Aruba Controllers

to enforce role based access control for ClearPass Policy Manager admin users

to enforce role based access control for ClearPass Guest Admin users

to assign ClearPass roles to guest users

to map AD attributes to admin privilege levels in ClearPass Guest

QUESTION 36
Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

Loading …

HPE6-A75 Certification All-in-One Exam Guide Aug-2023: https://www.test4cram.com/HPE6-A75_real-exam-dumps.html

Leave a Reply Cancel reply