Updated Sep-2023 Premium E_S4HCON2023 Exam Engine pdf – Download Free Updated 78 Questions [Q18-Q42]

Rate this post

Updated Sep-2023 Premium E_S4HCON2023 Exam Engine pdf – Download Free Updated 78 Questions

Authentic E_S4HCON2023 Dumps With 100% Passing Rate Practice Tests Dumps

NO.18 You are planning to use DMO of SUM to perform an “inplace-migration” to SAP HANA. What do you need to consider? Note: there are 2 correct answers to this question.

The source system is non-Unicode and the target database is a scale-out system.

The target database size increases temporarily because of the Shadow Repository.

SAP HANA Landscape Reorganization required a manual step to edit a file.

Network capacity between exporting and importing R3load processes must be.

Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.

NO.19 What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?

The benchmaking option allows you to migration a specified set of tables

The benchmaking option allows you to repeat the uptime migration

The repetition option allows you to run the migration without a shadow system

The repetition option allows you to repeat the complete migration

NO.20 Which of the following SUM activities require a stack XML file calculated by the maintenance planner?
Note: There are 3 correct answers to this question.

SAP S/4HANA conversion including DMO

Prerequisite check

DMO without system update

SAP S/4HANA conversion without DMO

Benchmark tool

NO.21 You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:

SYCM (Simplification Database Content)

SAT (Runtime Analysis)

ATC (ABAP Test Cockpit)

SE80 (Object Navigator)

NO.22 What do you need to consider when performing the SI checks for an SAP S/4HANA conversion? There are 2 correct answers to this question.

Depending on the SAP S/4HANA version, there are different SI check frameworks.

The SI checks are executed in the development system and the results are transported into the subsequent systems.

You need an SAP system based on AS ABAP 7.50 or above for the SI check framework.

You need to build up a SI check framework by applying SAP notes.

NO.23 SUM was registered at the SAP Host Agent. Based on which information does the SAP Host Agent determine the path to the SUM directory.

The path was stored in file host_profile during registration

The path was stored to the environment of user <sid>adm during registration

The path is taken from the URL entered in the browser to start SUM

The path was stored in file sumabap conf during registration

NO.24 You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a test cycle?

EU_IMPORT_ALL

EU_CLONE_MIG_DT_CREATE

EU_CLONE_MIG_SOT_RUN

EU_CLONE_MIG_DT_RUN

NO.25 Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?

The link to different patch levels to SUM

The corrections to the SUM Guide

An overview about possible upgrade paths

NO.26 When using the DMO of SUM, which files can be handled by SUM in the download directory?
There are 2 correct answers to this question.
Response:

Parameter file SAPup_add.par

Stack XML file calculated by the Maintenance Planner

Breakpoint configuration file SAPUPPHAS.BRK

MIGRATE J5T_DUR_XML file from a previous run

NO.27 Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:

Using the main configuration option “Single System” when installing an Add-On

Using the main configuration option “Single System” in case of an upgrade.

Using the database migration option (DMO) for SUM

Using the main configuration option “Standard” when applying SAP Support Packages

NO.28 During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status “automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?

SUM continues with the next phase and your modifications are kept as In the start release

SUM continues with the next phase and your modifications are lost

Before continuing with the next phase SUM asks for a modification adjustment transport

SUM refuses to continue unless you have marked a transport request as modification adjustment transport

NO.29 What do you need to consider when performing the SI checks for an SAP S’4I 1ANA conversion? Note There are 2 correct answers to this question.

You need an SAP system based on AS ABAP 7.50 or above for the SI check framework

The SI checks are executed in the development system and the results are transported into the subsequent systems

The errors from the SI checks must be solved, otherwise. SUM will report an error

You need to build up an SI check framework by applying SAP Notes

NO.30 You are executing as SAP S/4HANA Conversion with scenario strategy Standard. When will the shadow instance be stopped for the last time?

As part of the cleanup process

Before the downtime starts

Early in the downtime

At the end

NO.31 Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above?
There are 3 correct answers to this question.

Dual Stack split

Support Package Stack update

Database migration

Release upgrade

Homogenous system copy

NO.32 You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.

Apply the corresponding SAP note via SAP Note Assistant

Generate it by analyzing the specific custom code via RFC

Configure it within transaction ATC

Download it from SAP Support Portal

NO.33 You downloaded content from the SAP note 1000009 (“ASU Toolbox 2008”). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:

/ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)

/ASU/SSM (ASU Simple Schedule Manager)

/ASU/SHOW_NOTE (Show SAP Note via Web-Browser)

/ASU/START (Start ASU Toolbox)

NO.34 You are preparing for a standard SAP S/4HANA conversion from SAP ECC on Windows with SAP MaxDB to SAP S/4HAN. You are performing the corresponding maintenance transaction with the Maintenance Planner. Which kernels do you need to select for the SAP S/4HANA conversion?
There are 2 correct answers to this question.

Kernel for target release, Windows, SAP MaxDB

Kernel for target release, Linux, SAP HANA

Kernel for target release, Windows, SAP HANA

Kernel for source release, Windows, SAP MaxDB

NO.35 What is the benefit of using the file UPGANA.XML from a previous SUM run?
Please choose the correct answer.
Response:

To auto-fill specific fields on selected screens on the SUM UI

To make the progress information within SUM UI more accurate

To repeat specific phases during the SUM run

To skip selected phases during the SUM run

NO.36 You are performing an inplace SAP S/4HANA conversion including DMO. What is the latest point in time when you can reset the procedure without losing data?

The start of the Execution roadmap step

The start of the business downtime

The end of the business downtime

The end of the database migration

NO.37 Which preparational steps must be performed for an SAP S/4HANA conversion?
There are 2 correct answers to this question.
Response:

Uninstall industry extensions not supported by SAP S/4HANA

Install add-on SAP Gateway 7.50

Uninstall Fiori apps not released for SAP_UI 7.50

Delete client 066 (Early Watch Client)

NO.38 You are performing an SAP S/4HANA conversion for your production system. This conversion requires that certain business functions are switched on.
Following SAP recommendations, how will you achieve this?
There are 2 correct answers to this question.
Response:

Specify the business functions that need to be switched on during the prepare part of SUM.

Import a transport request from the development system that contains the recording of the activation.

Activate the required business functions manually in the production system.

During conversion, SUM delivers some business functions already activated.

NO.39 You are executing a standard SUM procedure to update an SAP system using main configuration mode
“Standard”. When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:

Before the downtime starts

At the end of the downtime

As part of the cleanup process

Early in the downtime

NO.40 In which scenarios do you need to use SUM 2.0 instead of SUM 1.0?
There are 2 correct answers to this question.
Response:

Upgrading to SAP ECC 6.08 without using DMO

Using DMO when applying Support Packages to SAP ECC 6.07

SAP S/4HANA conversion to SAP S/4HANA 1709

Updating to SAP ECC 6.07 using DMO

NO.41 During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:

In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp

In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log

In the job log for the corresponding job in SM37 (Job Overview)

In the corresponding R3trans log files of this phase

NO.42 What phases of SUM will be executed during an SAP S/4HANA conversion including DMO?
There are 3 correct answers to this question.
Response:

Phases DIFF*

Phase DOWNCONF_DTTRANS

Phase RUN_RSPTBFIL _ISUTABU

Phases EU_IMPORT*

Phase RUN_RSDBSCPY