Jul-2024 Free 350-801 Test Questions Real Practice Test Questions [Q93-Q109]

Rate this post

Jul-2024 Free 350-801 Test Questions Real Practice Test Questions

350-801 Dumps Updated Jul 21, 2024 WIith 390 Questions

Cisco 350-801 exam is an advanced-level certification test designed for IT professionals who specialize in Cisco Collaboration technologies. 350-801 exam is intended for individuals who work in the field of collaboration and seek to validate their skills in implementing and operating Cisco Collaboration Core Technologies. The Cisco 350-801 exam is part of the CCNP Collaboration certification track.

NO.93 A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LOAP Synchronized User in Cisco Unified Communications Manager. Which step is next to remove this user from Cisco Unified Communications Manager?

Delete the user directly from Cisco Unified Communications Manager

Restart the Dirsync service after the user is deleted from LDAP directory.

Execute a manual sync to refresh the local database and delete the end user.

Wait 24 hours for the garbage collector to remove the user.

NO.94 Refer to the exhibit. An administrator configures a secure SIP trunk on Cisco UCM.
Which value is needed in the Secure Certificate Subject or Subject Alternate Name field to accomplish this task?

the fully qualified domain name of the remote device that is configured on the SIP trunk

the common name of the Cisco UCM CallManager certificate

the common name of the remote device certificates

the fully qualified domain name of all Cisco UCM nodes that run the CallManager service

https://www.cisco.com/c/en/us/support/docs/conferencing/meeting-server/213820-configure- cisco-meeting-server-and-cucm.html

NO.95 An engineer is configuring a Cisco Unified Border Element to allow the video endpoints to negotiate without the Cisco Unified Border Element interfering in the process. What should the engineer configure on the Cisco Unified Border Element to support this process?

Configure path-thru content sdp on the voice service.

Configure a hardcoded codec on the dial peers.

Configure a transcoder for video protocols.

Configure codec transparent on the dial peers.

NO.96 What is the purpose of a hybrid Local Gateway?

to handle calls between Webex Calling and Cisco Calling Plans

to handle calls between Webex Calling and Cloud Connected PSTN

to handle calls between Cisco IJCM and Webex Calling

to handle calls between the Public Switched Telephone Network and Webex Calling

A hybrid local gateway handles calls between the Public Switched Telephone Network (PSTN) and Webex Calling. It is commonly deployed on the customer’s premises but can also be hosted by a partner. The local gateway registers with Webex Calling and handles all calls between the PSTN and Webex Calling. It gives customers the flexibility to bring their own service provider or continue using their existing provider for a smooth and effective transition to the cloud.

NO.97 A network administrator deleted a user from the LDAP directory of a company. The end user shows as Inactive LDAP Synchronize User in Cisco Unified Communications Manager. Which step is next to remove this user from Cisco Unified Communications Manager?

Restart the Dirsync service after the user is deleted from LDAP directory.

Delete the user directly from Cisco Unified Communications Manager.

Wait 24 hours for the garbage collector to remove the user.

Execute a manual sync to refresh the local databased and delete the end user.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab11/collab11/directry.html
#pgfId-1045229

NO.98 What is the major difference between the two possible Cisco IM and presence high-availability modes?

Balanced mode provides user load balancing and user failover only for manually generated failovers.
Active/standby made provides an unconfigured standby node in the event of an outage, but it does not provide load balancing.

Balanced mode provides user load balancing and user failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, but it does not provide load balancing.

Balanced mode does not provide user load balancing, but it provides user failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, but is does not provide load balancing.

Balanced mode provides user load failover in the event of an outage.
Active/standby mode provides an always on standby node in the event of an outage, and is also provides load balancing.

Balanced mode: This mode provides redundant high availability with automatic user load balancing and user failover in the event that one nodes fails because of component failure or power outage.
Active/standby mode: The standby node automatically takes over for the active node if the active node fails. It does not provide automatic load balancing.

NO.99 Drag and drop the SNMPv3 messages types from the left onto the corresponding definitions on the right.

NO.100 Which two elements of a dial plan define the domains that are accessible and are assigned to an endpoint? (Choose two.)

Call Admissions Control

Route patterns

Calling Search Spaces

Translation patterns

partitions

NO.101 A network administrator with ID0123456789 has determined that a WAN link between two Cisco UCM clusters supports only 1 Mbps of bandwidth for voice traffic.
How many calls does this link support if G.711 as the audio codec is used?

NO.102 Refer to the exhibit.

What causes the PRI issue?

The controller shut down

The cable is unplugged

The framing is configured incorrectly

The clock source is incorrect.

The show controller t1 command shows that the T1 interface is up but the line protocol is down. This indicates that the physical layer is working but the data link layer is not. The most likely cause of this is that the cable is unplugged.

NO.103 A user dials 9011841234567 to reach Vietnam. Which steps send the call to the PSTN provider as 011841234567?

NO.104 Refer to the exhibit.
An engineer configures a Cisco Unified Border Element and must ensure that the codecs negotiated meet the ITSP requirements. The ITSP supports G.7llulaw and G.729 for audio and H.264 for video. The preferred voice codec is G.711. Which configuration meets this requirement?

NO.105 A DTMF mismatch is occurring between an MGCP gateway registered FXS port and a Cisco Unified communications Manager SIP trunk.
Which media resource can be leveraged to interwork this mismatch?

Media Termination point

Conference Bridge

Annunciator

Trusted relay point

NO.106 User A Calls user. The call gets connected, but the quality is bed. What are two reasons for this issue? (Choose two)

Incorrect partition

No region relationship

Network congestion

Incorrect QoS

Incompatible codec

NO.107 Which call routing pattern is used for phone numbers that are in the E.164 format?

/+.! Route Pattern

+.! Route pattern

+.! Translation pattern

+1. [2-9]XX[2-9]XXXXXXX called Party Transformation pattern

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab12/collab12/dialplan.html
#pgfId-1591747

NO.108 Which two actions must be taken to provision a new device using self-provisioning?

Enable the self-provisioning IVR in the Cisco UCM

Import the user profile to the corporate LDAP directory.

Link the appropriate service profile to the provisioning template.

Link the appropriate universal device template to the user profile.

Ensure the user has a directory URI and a primary extension.

NO.109 An engineer troubleshoots outbound can failure on an ISDN-PRI circuit. The engineer ts suspecting the ‘Incomplete Destination”. Which debugs or commands are run in the voice gateway to troubleshoot the issue?

debug isdn q921
term mon

debug voip ecapi inout
show controller ti

debug isdn q931
show isdn status

debug isdn q921
debug voip ecapi inout

The engineer should run the following debugs or commands in the voice gateway to troubleshoot the issue:
debug isdn q931 – This debug will show the ISDN Q.931 messages that are being exchanged between the voice gateway and the ISDN switch. This can be used to identify the cause of the “Incomplete Destination” error.
show isdn status – This command will show the status of the ISDN PRI circuit. This can be used to verify that the circuit is up and running.
The other options are not correct. The debug isdn q921 command will show the ISDN Q.921 messages that are being exchanged between the voice gateway and the ISDN switch. This is not necessary for troubleshooting the issue. The term mon command will show the terminal monitor output. This is not necessary for troubleshooting the issue. The debug voip ecapi inout command will show the VoIP ECAP messages that are being exchanged between the voice gateway and the VoIP server. This is not necessary for troubleshooting the issue. The show controller ti command will show the status of the T1 controller. This is not necessary for troubleshooting the issue.

Loading …

Cisco 350-801 exam is a 120-minute exam that consists of 60-70 questions. 350-801 exam is administered by Pearson VUE, and it can be taken at any Pearson VUE testing center worldwide. 350-801 exam fee is $400, and the exam can be taken in English or Japanese.

View All 350-801 Actual Free Exam Questions Updated: https://www.test4cram.com/350-801_real-exam-dumps.html

Leave a Reply Cancel reply